• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Andrewk143

  1. A

    Cat d6r losing drive and after speed sensor locations

    Found the issue with this machine, ended up being the solenoid below the 2 solenoids I have pictured previously, it was welded to the shaft with all the rust and dirt in it, although when tested it was operational it mustn’t have had full movement, new one fitted and full pressure straight away...
  2. A

    Cat d6r losing drive and after speed sensor locations

    Sorry which test port are you referring to at the back of the case? I’ve checked all the clutch pressure points and they all seem to be fine and then I have tested the transmission relief Vance at the rear and getting 50psi there and then 0 at L1
  3. A

    Cat d6r losing drive and after speed sensor locations

    Pressure at the filter is 450psi
  4. A

    Cat d6r losing drive and after speed sensor locations

    Just quickly had a look at the attachment nige had sent and it’s Very informative, and I haven’t tested it at the pump yet no, I haven’t been back on the machine today so I’ll try test it at the pump tomorrow and let you know what I see.
  5. A

    Cat d6r losing drive and after speed sensor locations

    Sorry for the late reply, yeah it is diff steer mate, I’m going to go deeper in to the brake control valve tomorrow as I’m getting 0psi at the test port, I’m getting 24+v at park brake and 24+v at the service brake solenoids when applied but nothing is happening with pressure if either of these...
  6. A

    Cat d6r losing drive and after speed sensor locations

    That’s great cheers for that, I’m going to take a look at the priority valve tomorrow first thing, Is this the p1 your talking about just behind these solenoids under the seat/ above the top casing? If so I had no pressure showing. Thanks again
  7. A

    Cat d6r losing drive and after speed sensor locations

    What pressure should I be getting at the test point near the brake solenoids? Not that I’m getting any mind it’s sitting at 0 if hand brake is applied or not
  8. A

    Cat d6r losing drive and after speed sensor locations

    Machine serial number ade00462
  9. A

    Cat d6r losing drive and after speed sensor locations

    Hi nige, I have been told that they have known about the speed sensors for a while, and right now it isn’t coming up with them being active for some reason, but I now have a active fault 113 672.02 which I believe is my torque converter speed sensor? Could this cause the machine not to move...
  10. A

    Cat d6r losing drive and after speed sensor locations

    serial number 1644779 Hi I am having issues with my d6r losing drive you can be plowing along and then all of a sudden lose drive, or it’ll be reving still and slowly come to a stop, if I’m sat still and engage forwards or reverse you can hear it engage and revs drop also but won’t move, also...
  11. A

    Cat 962m e1389 fault code and 3609-12 fault code

    Hi nige hope you are well, is there and possibility you could send a pdf over for fault code 3609-11 on the same machine please
  12. A

    Volvo l150e losing its gears

    Yeah I went through all the gears and it was moving in every gear, so I have then swapped sa and se solenoids and got the operator to work it hard and it hasn’t missed a beat since!I seen on another thread a comment from yourself explaining which solenoid is for which gear, so ‘sa’ being forward...
  13. A

    Volvo l150e losing its gears

    Could the temperature sensor be causing me issues, got on site this morning and the machine is still chucking solenoid faults up, but the oil temp is up to 160fahrenheit, also the driver says it is chucking a I-ecu fault up now also, yet to try swapping the 2nd and 4th solenoid over, also the...
  14. A

    Volvo l150e losing its gears

    This is all great thanks mate, all the coils are all clean now and I have got the operator giving it a try now, if it fails again I will try swapping the sc and se solenoids over, could you swap just the coil? Or the spool also?
  15. A

    Volvo l150e losing its gears

    Hi, yes we do lose forward and reverse, where can I find the aps switch just all the symbols are rubbed off on my switches, also do you know which solenoid is for 2nd gear? Just there is 6 solenoids in total, 3 on the right 3 on the left
See more
Top