• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Aubrey Phillips

  1. Aubrey Phillips

    Case CX330 - No Start

    At the machine behind the seat and then at the 3 prong connector at the engine harness computer
  2. Aubrey Phillips

    Case CX330 - No Start

    We narrowed it down to the computer on the engine, We tried hooking up to it with INSITE and could not communicate with it. checking live data on the case computer we found engine computer was showing 900 rpm and code 0433 with everything unhooked from engine and still could not communicate with...
  3. Aubrey Phillips

    Case CX330 - No Start

  4. Aubrey Phillips

    Case CX330 - No Start

    Ok, I have codes 0141 and 0433 anybody know what those are I cannot find anything online
  5. Aubrey Phillips

    Case CX130D codes

    P2BAA - Nox exceedence - low reagent consumption P204F - reductant system performance bank 1 P204d - reductant pressure sensor circuit high P20A0 - reductant purge control valve circuit/open P208A - reductant pump A control circuit/open I would start by checking all fuses and wiring...
  6. Aubrey Phillips

    Case CX330 - No Start

    Yea, so it will crank with a hint of either & engine runs good, don’t believe it’s low compression. They were starting it on either then it would run fine rest of the day so I was told. But now it won’t stay running after it starts on either. I was able to go by yesterday afternoon and check...
  7. Aubrey Phillips

    Case CX330 - No Start

    Looking for some info on a case cx330. A friend of mine just bought it and the company he bought it from said they could start it on either and it would run on it’s on but gradually it got worse and got to where it would turn over but not start. It seems it could be an electrical issue like...
  8. Aubrey Phillips

    Cat 924F - Tilt is free falling when loaded

    I shot it with infrared camera while under a load and noticed it was bypassing internally in cylinder. Repacked cylinder with a Cat OEM kit and that fixed it. Thanks for all the help.
  9. Aubrey Phillips

    Cat 924F - Tilt is free falling when loaded

    I do have one & I will check the tilt cylinder. I was thinking the bore on cylinder could be worn or scarred up even though he’s had it reworked.
  10. Aubrey Phillips

    Cat 924F - Tilt is free falling when loaded

    I will definitely look into it once I can get by there. Thank you for the quick response.
  11. Aubrey Phillips

    Cat 924F - Tilt is free falling when loaded

    Got a customer that is experiencing a free fall when tilting down a load. He’s had the tilt cylinder repacked twice. I’m thinking this could be something to do with the control valve but looking advice. Thanks in advance Cat m# 924f Product# *5NN00752*
  12. Aubrey Phillips

    JD 450c sitting 15 + years

    I will make it happen
  13. Aubrey Phillips

    JD 450c sitting 15 + years

    32”on the pads, I’m not sure but we have some swampy areas here in lower Alabama
  14. Aubrey Phillips

    JD 450c sitting 15 + years

    Yea it measures 32” on the pads. Yes they seem to be releasing.
  15. Aubrey Phillips

    JD 450c sitting 15 + years

    I’ve located the radiator, hood and grille so far. Needing an air filter intake cover, several small things so far. Goal is to get it running if it will & check out transmission. My case 1845 has that style injection pump. It will definitely quit at the worst time
See more
Top