• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Austin9159

  1. Austin9159

    Deere 333d not moving

    Not $2000 for the shop to do it, it’s $2000 just for me to buy the pump from them. I’ll be doing the labor myself
  2. Austin9159

    Deere 333d not moving

    There’s some in there, not really packed but there’s a fine dust caught in it
  3. Austin9159

    Deere 333d not moving

    $2000 from the dealer, I’ll drain the oil, flush the system and hopefully it’ll be ready to work after that
  4. Austin9159

    Deere 333d not moving

    Well the shaft is nearly sheared on the hyd pump
  5. Austin9159

    Deere 333d not moving

    Coupler was shot, then pulled the filter and it was full of aluminum. Any easy was to tell if it’s the main pump or high flow pump?
  6. Austin9159

    Deere 333d not moving

    That’s it, I put a gauge on it tonight, no pressure, push in the center detent on the fitting and nothing comes out. What causes that coupler to break? I’m trying to piece this puzzle together. Bought the machine and the guy told me it needed a head gasket because the oil is milky. Turned out it...
  7. Austin9159

    Deere 333d not moving

    Okay, I’ve got a pressure gauge coming and will check it Monday. Thank you, is it possible to replace the coupler without removing the engine? Just chain up the engine and pull the pumps forward?
  8. Austin9159

    Deere 333d not moving

    Serial is 1T0333DMVBD205383. I don’t have a gauge for it, can you check pressure in the diagnostics menu? If not I’ll buy a gauge
  9. Austin9159

    Deere 333d not moving

    I bought a 2011 333d that originally had a glitch in the electrical causing the gauges to cycle when you hit the throttle, turned out to be the alternator over charging. Fixed that, no codes but after putting the lap bar down, seat belt on and pushing the hydraulic unlock nothing works. Lights...
  10. Austin9159

    Bobcat 753 won’t tilt

    Okay thank you
  11. Austin9159

    Bobcat 753 won’t tilt

    Mhmm okay, I’ll check that. I did notice when I pulled the trigger it didn’t seem to move. Please explain to me what the trigger does vs the flipper switch and the aux switch
  12. Austin9159

    Bobcat 753 won’t tilt

    Unplugged both both aux solenoids and it works fine. Plug one in, works fine, plug the other in and it stall. Put the wires on opposite solenoids and the probablem follows the wires. Does this mean my hand controls are to blame?
  13. Austin9159

    Bobcat 753 won’t tilt

    Okay that worked! Started machine, hit the trac lock button and only had lift. Hit the aux unlock button and move the switch on the drive handle to the far right and all functions start working. Move the switch to the middle or left and you hear the engine is under a slight load and bucket...
  14. Austin9159

    Bobcat 753 won’t tilt

    Okay I’ll try that, I hit the switch yesterday and could hear the system deadhead but didn’t try it while using the foot controls.
  15. Austin9159

    Bobcat 753 won’t tilt

    Bought this machine from a guy who said it sat for a few years and now doesn’t work right. Lift arms will go up but not come down, tilt does work. Tore the valve body down and replaced o rings and cleaned it, reinstalled then the issue was backwards, would go down but not up. Pulled the...
See more
Top