• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by crewchief888

  1. crewchief888

    S 175 bobcat lift foot pedal is locked

    any codes coming up? does your machine have mechanical locks? that the seatbar pushes down on? there may be 2 spool lock coils on the control valve. your pedal linkage could be rusted
  2. crewchief888

    Bobcat S185 intermittent park brake locking up

    it's possible your panel is bad, i'd do some investigating of the wiring harness from the panel to the mainframe connection under the cab looking for wear or pinched wiring. many many electrical problems start right at the battery, pull and clean your battery positive cable and clean ALL your...
  3. crewchief888

    Bobcat 751 hydraulic issue ?

    whats probably causing your blown hoses is having a 30 year old machine with 30 year old hoses :rolleyes: the difference in travel speeds fwd/rev is most likely the adjustment on the 2 halves of the steering linkage where they are bolted together. OR your steering is really out of wack and...
  4. crewchief888

    Bobcat T595 setting water in fuel code

    ive found several times that the wiring or connector were the problem. but then again, we have several customers that continually put watered fuel in their machines even after more than once a complete fuel system is put in :rolleyes:
  5. crewchief888

    Help with Bobcat 873 G

    holes are maybe 2" in diameter
  6. crewchief888

    Bobcat T595 setting water in fuel code

    try an OEM filter, and make sure you dont have water in the fuel tank
  7. crewchief888

    bobcat s70 hydraulic question

    looks like air in the oil to me. check the suction hose between the tank and pump. s70's (as well as 453/463) have a tendency to suck air in from the hydrostatic pump steering shaft seals.
  8. crewchief888

    Help with Bobcat 873 G

    belly pan drain holes are located on the bottom of the frame, towards the center of the chaincase about inline with the rear axles. there are no covers, just open holes
  9. crewchief888

    2014 T7 70 2600 charged pressure low after warm-up

    might want to take a look at the fan(charge) filter and check for debris. sounds like a bad charge pump to me
  10. crewchief888

    Bobcat t190 parking brake issue

    harness would be the 1st place i'd be looking for damage. cuz you really dont want to get to the swashplate sensor.. it's on the bottom of the hydrostat.
  11. crewchief888

    bobcat t740 power bobtach solenoid connector loose

    no.
  12. crewchief888

    Bobcat S530 fuel gauge\wiring issue

    typically the fuel sender wires, (as well as power bobtach) is a separate harness that plugs into the mainframe harness on the left side of the frame near the pulley on the hydrostat. it usually routed under the pump mount.
  13. crewchief888

    2014 T770 oil filter question

    depends on the condition of the cap.
  14. crewchief888

    2014 T770 oil filter question

    6678233 is the eng oil filter the other is the hydraulic fan/charge filter
  15. crewchief888

    S330 Fluid Leak

    you cant access anything from underneath. the plate you are seeing is a cover for the fuel tank drain and possibly a chaincase drain. only way to find whats leaking is to lift the cab.
See more
Top