• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Desertwheeler

  1. Desertwheeler

    210le Trans Overfilled

    i just checked it while it was running and it’s only maybe an inch high. So I’m thinking I might have over filled it when I serviced it and then didn’t double check the hydraulic oil after changing the filter. So we are going to watch it and if the leave doesn’t change I’ll just blame the idiot...
  2. Desertwheeler

    210le Trans Overfilled

    Serial is 885247. I was thinking it is the same but can’t remember for sure.
  3. Desertwheeler

    210le Trans Overfilled

    I will post it when I get back by it. I will also check the level while running and see if that makes a difference. If I run it will it hurt the trans if it does in fact have hydraulic in it? The tractor doesn’t even have 2k hours on it and had JD fluids it whole life.
  4. Desertwheeler

    210le Trans Overfilled

    I have a 210le with power shift and went to use it the other day and noticed that the trans was about 6” overfull on the dipstick. Also the hydraulic was either barely in the sight glass or it was just residual fluid. I didn’t have time to investigate yet but have some questions first. I...
  5. Desertwheeler

    Terex 5519 project help.

    We decided to not tear them apart just yet and run it a bit to see how everything else works. But from the sounds of it I might just try it myself. I will probably try to order all the seals I can find before hand so hopefully it can be torn down and put back together in a day or two.
  6. Desertwheeler

    Terex 5519 project help.

    hour meter shows 2940 seems like it is either incorrect or it just had a rough life. Pretty sure I am going to have to pull it. The shape of the frame wraps around the center of the axle so I can’t just unbolt it and pull one side out. Without knowing exactly how the internals all are I thinks...
  7. Desertwheeler

    Terex 5519 project help.

    Well got the new valve in and found out the seals are shot in the negative brake. So now looking into pulling the axle and resealing it. Gonna do a full tear down since we noticed a popping when driving and turning, hoping it was the bad tie rod ends. Any advice on pulling the axle apart for a...
  8. Desertwheeler

    Terex 5519 project help.

    So I am going to break this down, I got too many questions going on at once lol. Trying not to get too involved in too many issues at once with this thing. Goal is to get it functional and then fix the other issues. Park Brake, it was bypassed and not working until I reinstalled the shims for...
  9. Desertwheeler

    Terex 5519 project help.

    Is this what you are referring to? I guess I need to get a set of guages. Any ideas on what fittings I need?
  10. Desertwheeler

    Terex 5519 project help.

    What is the pump null? (EDIT) looked this up. I know its more that just uneven ground as when I put the chock block behind the wheel it powers into it some. I examined the brakes and found the brake master cylinder is bad and hope that is where the fluid was going. Ordering a kit to rebuild it...
  11. Desertwheeler

    Terex 5519 project help.

    I figured I would just start a thread on this project as it’s going to be on going. I am going through our new to us 5519 and noticed a couple things. 1 when in neutral it wants to move backwards, 2 when you start it it seems like one side of the hydraulic system has pressure when the controls...
  12. Desertwheeler

    Terex TX 5519 tilt safety valve.

    what would make it leak out the top? Do you think I could get away with just replacing the cartridge or should I just do the whole thing?
  13. Desertwheeler

    Terex TX 5519 tilt safety valve.

    Thanks! I’ll have to see what I can find on it.
  14. Desertwheeler

    Genie GTH-5519 Fire!

    look forward to the update video! I called Estevon and he’s working a quote up for me. Thanks for the info!
  15. Desertwheeler

    Tire keeps falling off

    I ran 60 psi for years on my 763 bobcat. Then when I got my cat 226 the recommended pressure was 45, I instantly noticed the smoother ride and more traction. Never popped a tire off the bead even running at 30-35 psi for sand in the asphalt. I started running berryman’s tire sealant and it is...
See more
Top