• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Don stanley

  1. D

    Case 621 loader

    First and foremost thank you so much for taking the time to help me. I don't have any mechanics within 250 MI. As for your questions with the engine running the oil level is good the voltage is 24 volts at each solenoid. Not sure what you mean by the diode unless it's the rectifier module diode...
  2. D

    Case 621 loader

    I replaced all 5 solenoids with 2241s. Wants to engage but barely moves. Waiting for 2019s and hope that's the problem.
  3. D

    Case 621 loader

    I need help with a 621 with a Clark 501 trans. If anyone sees this . Replaced 4 0f 5 solenoids and feels like it's engaging but barely moves. Tried to post this on forum but it kicked it out so sorry to jump your conversation
  4. D

    Bobcat 863 Duetz factory remaned engine lost power and smoking

    Want to thank all of you for your help! I finally got the right turbo and injectors for the 863 and after many swear words, got them installed. Runs like new. Thank you all!
  5. D

    Bobcat 863 Duetz factory remaned engine lost power and smoking

    Vetech63, again steady light black smoke at idle then increases under load. New turbo has the wrong oil return fitting but there was oil in the intake side of the turbo and the fins on the exhaust were coated with soot. Appreciate your patience as I am not a mechanic and doing the best I can to...
  6. D

    Bobcat 863 Duetz factory remaned engine lost power and smoking

    Stefuel, sorry for the misunderstanding. The entire intake system (filter, filter housing, intake tube, etc.) Is apart with absolutely no moisture noted. Thanks anyway for your attemps.
  7. D

    Bobcat 863 Duetz factory remaned engine lost power and smoking

    Bobcat is outside sadly. Started tearing it down this AM when it was 19 degrees. Oil is in the intake side and the impeller on the boosted hide is black with soot. It spins freely but didn't notice any side play. Wondering if the oil seal blew hence my symptoms. No snow has ever been in the...
  8. D

    Bobcat 863 Duetz factory remaned engine lost power and smoking

    Turbo has oil all over the intake tube. Plus, they sent me the wrong turbo. Major soot in the exhaust outlet. Is this due to a bad turbo? I can't get a Bobcat tech up here so appreciate any help
  9. D

    Bobcat 863 Duetz factory remaned engine lost power and smoking

    Just got the replacement turbo and will put in tomorrow. Based on the soot stains on the bobcat including the side vents for the cooling fan, my hope is that it is a faulty turbo. Will update tomorrow. Thanks again to all of you. Wish me luck as we have feet more of snow coming next week. God...
  10. D

    Bobcat 863 Duetz factory remaned engine lost power and smoking

    Again, thanks stefuel. I've replaced all filters and should hopefully get the parts in the next few days. Fingers crossed as we just surpassed 600 inches of snow.
  11. D

    Bobcat 863 Duetz factory remaned engine lost power and smoking

    The 863 was running fine for a couple of weeks although being worked very hard with the near record snowfall. Can't get anyone from Bobcat up here due to road closures so am trying to get it fixed myself. Have a new turbo and injectors on the way. Hopefully this will help. Thanks everyone for...
  12. D

    Bobcat 863 Duetz factory remaned engine lost power and smoking

    I'm leaning towards a bad turbo. I'm at over 8,000 feet here and based on one of the replies that black smoke equates to unburnt fuel makes me wonder. The heavier smoke is when under load and the power is really wanting when blower is ingaged or climbing any kind of incline. All filters new and...
  13. D

    Bobcat 863 Duetz factory remaned engine lost power and smoking

    Up in Mammoth getting buried and can't get anyone up here to fix this due to weather and road closures. I've changed all filters and oil but it's still smoking black under load with a noticeable power loss. Running a SB240 blower. Any suggestions would be greatly appreciated.
  14. D

    621B drive problem

    Have a '91 621 that tranny slips in 3rd and 4th. 1st and 2nd are fine. Any ideas?
See more
Top