• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by dzlnut

  1. D

    It24F windshield wiper motor

    Does anyone have instructions on how to replace the front windshield wiper motor on a IT24F?
  2. D

    Oshkosh Snow Plow Trucks

    Is anyone running an older Oshkosh snow plow truck? 1970s-1980s Era What are the pros and cons of running them? What are the major problems you've had and cost to fix them?
  3. D

    CAT IT24F need help with a few items

    Merry Christmas and happy holidays So here's an update The 8Y7609 CIRCUIT BREAKER GP has been completely rebuilt. I reinstalled it and the engine doesn't crank at all Theres no "click" of the starter when I turn the ignition key. The starter was tested when the mechanic came out the...
  4. D

    CAT IT24F need help with a few items

    the mechanic came out and diagnosed everything. The culprit seems to be the breaker box on the right side of the machine. There is a lot of corrosion throughout all the wiring/ connections also there were at least 2 wires that have corroded so badly they were disconnected and could not be...
  5. D

    CAT IT24F need help with a few items

    thank you for the diagram I was able to find the valve and turned them on
  6. D

    CAT IT24F need help with a few items

    well the ignition switch was replaced and that was not the issue.
  7. D

    CAT IT24F need help with a few items

    if it is the ignition switch do I need to re-key it? I ordered an ignition switch yesterday
  8. D

    CAT IT24F need help with a few items

    Thank you @Nige you are a wealth of information Im looking forward to learning Im still learning this machine, what area would I look for the isolation valves? In regards to starting the engine it just got worse, this morning I went to start it when I turn the key to the first position...
  9. D

    CAT IT24F need help with a few items

    I have a 1995 CAT IT24F and there a few things going on. When you turn on the a/c and heater air blows out but it will not blow any heat out..... How can I fix that? Sometimes when I turn the key to crank the engine it makes a sound like it does when you turn the key on a car and the engine is...
  10. D

    Service truck bed organization

    hey guys I run a 8 foot Stahl Utility/ Service bed on my Ram 2500 and I am looking for compartment organization ideas Can you guys post pictures of your setups
  11. D

    CAT IT24F Engine block heater

    The low temps are generally single digit but it can get into the -1 to -5 range I do not have 240 power available but the block heater will always be plugged in
  12. D

    CAT IT24F Engine block heater

    thank you everyone for the help I have learned a lot from all of your insight. I plan on using 120 volt to power up the element I looked at the element but I do not see any marking on it that says 220 or 120 volt So it sounds like I should return part # 124-0687 to CAT and get the 120 volt...
  13. D

    CAT IT24F Engine block heater

    thank you everyone for the help I have learned a lot from all of your insight. I plan on using 120 volt to power up the element I looked at the element but I do not see any marking on it that says 220 or 120 volt So it sounds like I should return part # 124-0687 to CAT and get the 120 volt...
  14. D

    CAT IT24F Engine block heater

    Is the 124-0687 part number the correct version for my engine? there were some doubts that it was the correct one from the other forum
  15. D

    CAT IT24F Engine block heater

    It is not equipped with an intake grid heater, the switch location for it is a blank that would be great I appreciate the help
See more
Top