-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Hunter013's latest activity
-
2019 KW T800 with a X15 in it. Had a service call where air wouldn't build above 50 psi. Found braided line from compressor to dryer... -
Hunter013 replied to the thread Eaton Ultrashift Code.Correction: After talking with my driver, he said once he had the box in the air with the PTO still on, he would put it in drive and...
-
Hunter013 replied to the thread Eaton Ultrashift Code.Correction: After talking with my driver, he said once he had the box in the air with the PTO still on, he would put it in drive and...
-
Hunter013 replied to the thread Eaton Ultrashift Code.This truck ended up going to Peterbilt dealer and got the clutch changed last year. It has been back probably 6 times for this same code...
-
Hunter013 replied to the thread MV3 Valve leaking.Put a bendix valve in it and so far works great. The last 2 we had in it were automann brands.
-
Hunter013 replied to the thread MV3 Valve leaking.Correct. Button’s pulled out
-
Hunter013 replied to the thread Cracking Cross Member.We’ve had this truck since new and we’ve never touched anything in the driveline. I’ll check u-joints, slip joints, carrier bearing and...
-
Hunter013 replied to the thread Cracking Cross Member.
-
-
2020 Kenworth T800 quad axle dump truck I noticed a cracked cross member while I was last under my truck. Its the carrier bearing cross...
-
Hunter013 replied to the thread MV3 Valve leaking.The air is coming out of the delivery ports on the valve itself. So the only lines hooked up are the 2 supply lines. Do I trace those...
-
Hunter013 replied to the thread MV3 Valve leaking.I also took off the delivery lines for tractor and trailer and there is slight air pressure coming out of the delivery ports.
-
2005 Peterbilt 378 MV3 valve leaks out of exhaust port when tractor brakes are set. Intermittently leaks when tractor brakes are...
-
Hunter013 replied to the thread Mack MP8 Fan Clutch Harness.I found the harness part number. 23481456 Could a failing thrust bearing cause the crank pulley to want to pull the belt in a certain...
-
Hunter013 replied to the thread Mack MP8 Fan Clutch Harness.I will look a little more extensively, but I couldn't see any bad spots on the pulleys or tensioner. The belt wasn't jumping tension...
-
Hunter013 replied to the thread Mack MP8 Fan Clutch Harness.I did watch the damper while it was running and it seemed like it had a slight wobble to it, but I thought it was more of my eyes...
