• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by IpswichCASE

  1. IpswichCASE

    Where to start... 1845b

    Yup… I read that the fixed side is the “power” side and goes on the side marked with the orientation of your pump….. CC for my pump
  2. IpswichCASE

    Where to start... 1845b

    My mistake... wrong pic. There were some very thin shims. I knew they came from here but forgot where. Do they go in the end between the spring and the screw on cup? I wish I could find a good exploded view pic of my pump. All the ones I find seem to be a little bit different. I'll lay...
  3. IpswichCASE

    Where to start... 1845b

    so here is a question…. You can see the top part plunger is spring loaded. On my pump the bottom part is fixed…. Doesn’t move. Is that right or is the plunger stuck frozen? I think it’s not supposed to move. I think it’s just one solid piece. Is that correct?
  4. IpswichCASE

    Where to start... 1845b

    Well, I think my pump rebuild attempt might have failed.:( Everything looked pretty good. And went back on it was going smoothly and I even added a lift pump because my primer was badly leaking but in the end no fuel was coming out of the injector holes at the pump. Any suggestions? Or should I...
  5. IpswichCASE

    Where to start... 1845b

    So here I am with this engine.... - I have the pump all together and installed - Timing was straight forward - My fuel priming pump leaks when I pump it. - There is fuel to the fuel filters - I pulled the manual... looked up the injector based on the engine serial number. Purchased injectors...
  6. IpswichCASE

    Where to start... 1845b

    Where is a good place to purchase these injectors? For a good price
  7. IpswichCASE

    Where to start... 1845b

    I see all your points. Just asking. I don’t want to do this again. Best to spend the $$.
  8. IpswichCASE

    Where to start... 1845b

    Hey Knuckles... thanks for the pump manual. I had found that online, saved it, and have printed certain sections. I appreciate you attaching it. I've read through it and like anything that you are not familiar with I am sure I am missing some finer points. I'm becoming familiar with the...
  9. IpswichCASE

    Where to start... 1845b

    Thank you "pumpguy". With this info I can put it back together and hopefully she will live again. The injector has number 20350. That is all I need? I will look.
  10. IpswichCASE

    Where to start... 1845b

    Thanks for the pointers... Regarding the injectors, I have also googled them using the number I posted and what comes up certainly looks the same. Am I to believe that all I need to do is look for a Case 188d injector and what comes up will work just fine? And that it won't need adjustment? I...
  11. IpswichCASE

    Where to start... 1845b

    UPDATE- I am rebuilding the injector pump… when I disassembled it the plastic ring on the weight cage was everywhere. And so I thought I may as well replace the injectors also. Eliminate any potential fuel delivery issues. I have a 1984 1845 … 188d. What injector should I purchase? On the old...
  12. IpswichCASE

    Where to start... 1845b

    It's tough when you have no shelter to work on your toys here in the northeast. Cold, snowy, rainy... eh, that's life. I have my skid home (that's another story) and pulled the pump. I found a pretty good video on youtube and disassembled it. Here is what I found... First, the pump is a...
  13. IpswichCASE

    Where to start... 1845b

    I got your message, thanks. And I appreciate your help.
  14. IpswichCASE

    Where to start... 1845b

    I appreciate the pointers. If I decide to just have it rebuilt, what’s that going to set me back? I’ve watched a few videos....read a few threads... rookie rebuilders aren’t always successful. also, is the manual available online for free somewhere? And where would I buy those tools?
  15. IpswichCASE

    Where to start... 1845b

    The lines did move. The pump is spinning. So just line up the lines before pulling or is there something else I need to do/align? Is is advised not to attempt a rebuild yourself? I have rebuilt many different carburetors and am not afraid to attempt it. I purchased the rebuild kit months ago...
See more
Top