• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by ironman1953

  1. I

    2021 cat 299d3 idle issues

    I have some used kubota V3800 engines , same as Cat V3.8 , if anybody needs some parts , the later engine has DEF , and early engine does not , the pumps are different , later engine pump PN is 1J508-50500
  2. I

    299D2 PURGE LAMP NOT GOING OUT LEAVING DEAD BATTERY

    nobody said anything about any status report
  3. I

    299D2 PURGE LAMP NOT GOING OUT LEAVING DEAD BATTERY

    also says the hand throttle and foot throttle are out of synch , and they need to be synchronized , both requiring cat service rep to come back , yhe cat guy cleared all the codes , but the machine still wont rev up
  4. I

    299D2 PURGE LAMP NOT GOING OUT LEAVING DEAD BATTERY

    OK , we are back working on the machine again , yes the ser # is FD202813 has 2540 hrs on it , and yes it has dash pannel in the upper RH cab corner , had a Cat service guy look at it , put his computer on it and he says it needs a Def pump...
  5. I

    299D2 PURGE LAMP NOT GOING OUT LEAVING DEAD BATTERY

    hello , we have a cat 299d2 track loader # 202813 having a problem with it derating , and hand throttle control quit working , and battery keeps going dead ,must have a draw on it , so yes , we are trying to get to the bottom of this , and yes I would...
  6. I

    looking to buy cat 277C,

    the lights work
  7. I

    looking to buy cat 277C,

    ser # CKJW02538 looks like a 2011 machine , no alarms , no gauges no buzzers , all dead , but it starts and runs and functions
  8. I

    looking to buy cat 277C,

    ser # CKJWF02538 , looks like a 2011 machine , no alarms , no gauges , no buzzers , no electrical , all dead , but machine starts and runs and functions
  9. I

    looking to buy cat 277C,

    looking to buy a cat 277c skidsteer , everything works , but the dash is blank / dark , anybody have any ideas
  10. I

    daewoo 220 lc two speed

    those wiring diagrams are as good as it gets in this manual , but we did get it to work , my technician who is very resourceful , though we never really found the problem,, He figured out a way to wire in an extra little harness to trick the low pressure system into diverting the oil...
  11. I

    daewoo 220 lc two speed

    more wiring diagrams
  12. I

    daewoo 220 lc two speed

    thank you ,we do have a service manual , with some wiring diagrams , we now have realized we are in the right area now , but now another thing that makes this harder to figure out , this machine has this EPOS computer control system on it , and all the wires from these solenoids and switches...
  13. I

    daewoo 220 lc two speed

    hyd line from center swival connects to center hose of the 3 hoses shown,, on this 2nd 3 soilanoid valve
  14. I

    daewoo 220 lc two speed

    from junction valve , lines go to this 3 solenoid valve assy
  15. I

    daewoo 220 lc two speed

    hoses from travel foot valve go to this junction block
See more
Top