• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by jud440

  1. J

    jlg 10-55 poor heat

    also checked hoses not kinked and checked the electric coolant valve and it is working properly
  2. J

    jlg 10-55 poor heat

    disconnected the hose going to the head plugged it ran the hose I took off into a pail and lots of coolant came out . a few days ago removed the lines at the heater and blew air thru the heater core not plugged. put a 190 degree thermostat ran it but upper rad hose is cold was going to block off...
  3. J

    jlg 10-55 poor heat

    installed jlg heater originally a open cab poor heat replaced thermostat no better heater hoses show 140 with infrared gun engine running around 160-170 with new thermostat any ideas would be appreciated I'm in Canada and its below zero
  4. J

    4239T low oil press need help

    well got around to pulling the oil pan went in there with a mirror and sure enough no nozzles in there just the holes so that's my problem I guess when I bought used block they took them out I never new the difference anyway thanks a bunch
  5. J

    4239T low oil press need help

    so your thoughts are 1 or all jets not there the John Deere dealer said its wasn't a Dubuque he thought it was a saran engine . I guess pull the pan and look can't believe I missed if there not there I bought this used. block I guess they may have pulled them out . you think tear down if there...
  6. J

    4239T low oil press need help

    s/n T04239D196116. mod 4239DF001
  7. J

    4239T low oil press need help

    ill try to run with the valve cover off and I had spoke to John Deere parts he ran the numbers on the block and said there were no cooling jets
  8. J

    4239T low oil press need help

    don't understand what you mean with the rocker shaft in backwards
  9. J

    4239T low oil press need help

    I also don't have cooling jets
  10. J

    4239T low oil press need help

    I plasti gauged all the bearings I used 2 different gauges I don't know where that ball is located in the block could you be more specific where it goes
  11. J

    4239T low oil press need help

    rebuilt engine all new parts old block was shot got used block all parts sent to machine shop plastigaged everything good new oil pump 3 to 4lbs oil press at idle 15 lbs reved up . is there a plug missing that's dumping my oil ? any ideas would be appreciated
See more
Top