• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Kels306

  1. K

    D6t hydraulic oil going into trans

    D6t , serial prefix # djg , Took out implement pump and brake cleaned seal , been sitting a while with pump full of oil seal is still dry , going to be pulling out steering motor next or should I be taking out the steering pump next
  2. K

    John deere 350glc codes

    I'm getting codes 2030.09 and 2228.09 When you run the machine it will be fine then alarm will go off for a second rpms come down and then it's back to normal , serial number is 1FF350GXTKF813625
  3. K

    D6h dozer axels

    Having issues with a d6t only has to go in maybe another inch and a half , left side
  4. K

    Hitachi zx350-6 , intermittent codes

    Thank you much appreciated
  5. K

    Hitachi zx350-6 , intermittent codes

    We got all John Deere track hoes 350s and I know my way around them , we are trying out the hitachis for being twin machines they do have there differences
  6. K

    Hitachi zx350-6 , intermittent codes

    Any izusu guys on here
  7. K

    Hitachi zx350-6 , intermittent codes

    I'm gettin a 10542-12 and 10044-01 , you can delete the codes in the monitor and the machine runs good still uses def , the def gauge only goes down to about 80 percent so not sure if it's a header issue , going to swap out nox sensors on a good machine and try that , itll run fine for a few...
    • Kels306
    • Thread
    • doc dpf emissions hitachi isuzu
    • Replies: 6
    • Forum: Excavators
  8. K

    Cat 735 rock truck issue loosing all gears

    That sensor is located inside the transmission cover ?
  9. K

    Cat 735 rock truck issue loosing all gears

    700 fm1 2 , the transmission sensor , thatll be under the cover on top of the tranny I believe, the only plug on it is on the side of it
  10. K

    Cat 735 rock truck issue loosing all gears

    I've got a cat truck serial number CAT00735TB1N01044 it's a 2008 , has a reman transmission in it , when brought back out to site the operator can drive it for a few hours then once put into neutral it will loose all gears , once it sits for a while it will go and work for a few more. Hours ,it...
  11. K

    Ham packer h13i

    Getting code 524022 , won't let me force a burn with diesel laptops , it says soot load is at 0 percent, any ideas ?
  12. K

    Cat 735b rock truck , no power to move while loaded

    That's the way It was when I took it apart it was working fine since it got rebuilt by cat in 2017 and the issue I had started 2 weeks ago
  13. K

    Cat 735b rock truck , no power to move while loaded

    What are you saying about the ratchet teeth or where are they
  14. K

    Cat 735b rock truck , no power to move while loaded

    It spun free in both directions, I straightened out the springs to see and it would lock in , what would cause those springs to rotate in there
  15. K

    Cat 735b rock truck , no power to move while loaded

    It spun both ways. I straightened out the springs then it would lock in both ways , the transmission had a tag on it saying it was rebuilt in 2017 , but yes I'll be getting all the parts
See more
Top