• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

mekanik's latest activity

  • mekanik
    mekanik replied to the thread Strange buyer's.
    When my siblings and I cleaned out my parents house I was shocked at how much garbage my Dad saved. We had a two yard dumpster dropped...
  • mekanik
    mekanik replied to the thread Memories for us old truckers.
    I thought it might be. I searched the internet and could not find one that looked like it.
  • mekanik
    mekanik replied to the thread Strange buyer's.
    A friend tells me its the same way on the dating sites.
  • mekanik
    To all you folks experiencing weird turbo issues on your 06-07 4300 series with a DT466, the issue turned out to be a plugged cat. I...
  • mekanik
    The orifice in the filter housing takes a 7mm allen wrench to remove it. The grit in the bottom of the housing will go through the...
  • mekanik
    mekanik replied to the thread Upfitting an International 4700.
    This is what I come up with:
  • mekanik
    Are you measuring the back pressure ahead of the turbo or after the turbo? The spec on page 2 is 16.1 kPa or 2.33 psi after the turbo at...
  • mekanik
    Monte Below is a breakdown of the fuel filter. #6 is the orifice/regulator assy. It is notorious for getting debris on the seat and a 5...
  • mekanik
    Monte Do you have a way to read live data from the engine while driving the truck? ICP desired and ICP actual would be a help. Can you...
  • mekanik
    mekanik replied to the thread 3406.
    What year is the machine? There should be a 1/4"pipe plug in the flywheel housing, take it out and there will be a 3/8" hole in the...
  • mekanik
    mekanik replied to the thread 3406.
    My 3406 experience was all on truck engines. I am assuming the equipment engines are the same. Possibly something could have gone wrong...
  • mekanik
    mekanik replied to the thread 3406.
    Can you verify the timing?
  • mekanik
    mekanik replied to the thread 3406.
    So it quit or was shut off? Has is sat for a period of time?
  • mekanik
    mekanik replied to the thread 3406.
    I would start at the shut off solenoid. Is it getting power? Does the rod retract when power is applied to it?
  • mekanik
    mekanik replied to the thread 3406.
    It quit and won't start? can you post the serial number?
Top