• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

NH575E's latest activity

  • NH575E
    NH575E replied to the thread 555e Hub Seal.
    I have fixed several leaks by opening up stuck or clogged vents. Always the first thing I check too.
  • NH575E
    NH575E reacted to Mike-G's post in the thread 555e Hub Seal with Like Like.
    One side of mine was leaking bad. I thought it was due to the bushing being worn so I bought the bushing o rings and seals. Once I got...
  • NH575E
    NH575E replied to the thread 555e Hub Seal.
    Mine never started back leaking so no.
  • NH575E
    NH575E replied to the thread 555E Wheel bearing preload torque spec.
    I think I would use the value on the chart. No more than 80. Might want to put some blue thread locker on it.
  • NH575E
    NH575E reacted to mg2361's post in the thread Low coolant temp? with Like Like.
    Your machine serial indicates that the cab heat PIP was a fix as fail PIP for your machine and that it was never performed...
  • NH575E
    NH575E reacted to mg2361's post in the thread Low coolant temp? with Like Like.
    There was a product improvement program to address cab heat on those machines depending on the machine serial number (which you never...
  • NH575E
    NH575E replied to the thread NH 555E grill makover..
    Nice job! My grill was missing so I just cut a piece of expanded metal to fit the hole with no frame work. Now I feel lazy.
    • grill.jpg
  • NH575E
    NH575E replied to the thread Low coolant temp?.
    I see several different part numbers listed for 310J thermostats but none have any temperature details listed. You need to look at the...
  • NH575E
    NH575E reacted to Katherine A DeHaven's post in the thread Radiator leak with Like Like.
    JB weld seems to have worked. Ran it for a good half hr with no leaks. I'm lucky on the location of the leak, i was able to coat the...
  • NH575E
    NH575E replied to the thread Radiator leak.
    I suspect the actual leak is above that point and dripping down to the tube you photographed. That loop looks more like an oil cooler or...
  • NH575E
    NH575E reacted to willie59's post in the thread Republic Oil 5% Moly #1 Heavy Duty High Temp Grease with Like Like.
    Well, you've already purchased it so don't throw money out the window. It will work, but will likely "wash out" quicker because of low...
  • NH575E
    NH575E replied to the thread Republic Oil 5% Moly #1 Heavy Duty High Temp Grease.
    I don't know why I was thinking 1 was thicker than 2. This may not be the best for my pins. As far as moly in wheel bearings go I have...
  • NH575E
    NH575E posted the thread Republic Oil 5% Moly #1 Heavy Duty High Temp Grease in Tractor/Loader/Backhoes.
    I've been meaning to try this grease for a while and finally got around to ordering it. It looks like good thick grease that should stay...
    • IMG_20240325_142046221_HDR.jpg
    • IMG_20240325_141934810.jpg
    • IMG_20240325_142223010.jpg
    • IMG_20240325_142304548.jpg
  • NH575E
    NH575E replied to the thread 555e Floor.
    OMG! Never seen these. Sets are pricey but individual sizes are pretty reasonable...
  • NH575E
    NH575E reacted to eKretz's post in the thread 555e Floor with Wow Wow.
    Try these: Very handy indeed. Air hammer with the offset round-nose chisel taps the fittings right loose and tightens them too...
Show older items
Top