• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by outlawspeeder

  1. outlawspeeder

    Case forks top rod

    Good plan I like that in place of welding.
  2. outlawspeeder

    Case forks top rod

    I've seen forks without the bar. I figure someone had to cut it to get it off the bucket. I like the support part but 1144 is a poor choice if welding caps on the end. It will go with more hooks. It sound like the rod is 2".
  3. outlawspeeder

    Case forks top rod

    I have a line on a set of forks that might work for me. They are missing the top rod? What size should the rod be? And is it soild? The forks are 4foot tall / 4 foot long. The hole at the the top is a 2 ibnch hole. If that is not right . let me know. I've only seen pictures of them. My...
  4. outlawspeeder

    580C Cutout Solenoid Repair

    Any one have a source for the Brake switch?
  5. outlawspeeder

    Used 16" bucket for Case 580C

    I have a 275 TIG (does arc welding too) and the compressor but my plan is to use a plasma torch that has a setting for this. If you ever get a chance to run a plasma torch you will never go back to carbon arc gouging. To put the new back on, I grind to clean metal. Tack in place using the...
  6. outlawspeeder

    Used 16" bucket for Case 580C

    Thanks I was planning 1/2" but if someone said thicker... Thanks again. I plan on starting the old cut out this weekend.
  7. outlawspeeder

    t595 loosing and regaining hydraulic function

    Filter? If it is plugging up.... When you added hyd is there a chance you mixed up crap off the bottom of the tank???
  8. outlawspeeder

    Used 16" bucket for Case 580C

    I pick up a 16" no teeth bucket for my 580. It looks like it has had a couple of cutting edges welded on over the years. The rest of the bucket is in good shape. My plan is to cut of the three layers of cutting blades. Right now the leading edge of the cutting edge is 2 inches. I haven got...
  9. outlawspeeder

    580 Buckets

    Yup. Looking for what fits on what. I keep finding buckets but I don't know if they'll work. To add to it when I ask the person selling the measurements are always not what I need to know. They may even know what it came off of.
  10. outlawspeeder

    580 Buckets

    Is there a list of what buckets fit what model of 580? Or is there a spec sheet for them to make it easy when shopping? Like a bolt pattern checker for Chevy wheels? i.e. will a 580C fit a 580K?
  11. outlawspeeder

    Anyone try the aftermarket 580 brake slave cylinders?

    I did Slaves and masters from Ebay. I also relined the out pad but not the sides. Now I have to go back in and do those.
  12. outlawspeeder

    Looking for smooth blade for 580C backhoe

    O need to do some smoothing and prices are nut. I look for a bucket I could modify...$$$$ So if I get two old teeth and weld a flat blade to it... Anyone try this as a cheap option. I have to cut in a drain hose but can only pull up at 90degee. Its next to the house.
  13. outlawspeeder

    580C swing foot pedals - spring return?

    1st was it running? Some of the centering is via Hyd pressure.
  14. outlawspeeder

    Case 580C backhoe shuttle box install

    Back the Shuttle out some. Then spin the Torque converter till it slides aft into the shuttle and locks into the the pump in the Shuttle. The Torque converter has to a line with the pump. Its about 3/4". You'll know when it slides in. I use a piece of bent metal bolted to the pan to hold...
  15. outlawspeeder

    1979 Case 580C Backhoe Left Drive Tire Won't Turn

    The links I add above?
See more
Top