-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Queenslander's latest activity
-
Queenslander replied to the thread Adding Rippers to a Cat D6H diff steer.Just not sure what flow ours is producing but they work fine through 1/2 inch hose into twin cylinders. -
Queenslander replied to the thread Adding Rippers to a Cat D6H diff steer.No, we bought the tractor after the rippers had been installed a couple of years. You could easily do it yourself after nutting out the...
-
Queenslander replied to the thread Adding Rippers to a Cat D6H diff steer.Our 6R has aftermarket Gessner rippers with a diverter valve on the tilt cyl. circuit. I’ve never studied it properly but looks simple...
-
Queenslander replied to the thread Topcon laser on bobcat grader.I guess the main reason we are looking at the GB is that we are coming from a grader background. It does have those little wings that...
-
Queenslander replied to the thread Topcon laser on bobcat grader.Just shed pads, around feedlots, cattle yards, house hold driveways etc. Basically, areas that are too tight for a full size grader. No...
-
Queenslander replied to the thread Topcon laser on bobcat grader.We’re pricing one at the moment, along with the new 255 CTL. We have Topcon 2D on our graders, so hoping we can use those receivers on...
-
Queenslander replied to the thread Topcon laser on bobcat grader.Is this the GB124 that you mentioned in your thread CM? If so, how are you finding it?
-
Queenslander replied to the thread 1997 Ford LT9000 tandem dump truck.Sadly, it looks like that is likely an Aussie truck as the door is on the LHS, away from oncoming traffic. Can only be put down to...
-
Queenslander replied to the thread New Caterpillar 265 Skids.Do you have your machine yet jaclo? I’ld be keen to hear your first impression.
-
I have a ditch compactor I was scraping out for the engine. Before I tore it apart I decided to start it up. I hooked up the jumpers and...
-
As soon as you said it started smoking that was the clue, I had one do it in the shop years back. Except it was the stainless discharge...
-
Queenslander replied to the thread Flaming Air Line.I s’pose I can only be grateful that the hose did act like a fuse or the same thing could have happened to us. As far as I could tell...
-
Had a head scratcher recently. 2012 Western Star 4900 blew the air line between the drier and the purge tank one night. This is a metal...
-
Queenslander replied to the thread 1997 Ford LT9000 tandem dump truck.Just going back to tailgates for a moment. These two-way tailgates are very common here, there would be many more trucks with them than...
-
Queenslander replied to the thread My D6D.Looks like it’s the cheaper option. The last ELI that I bought was the concentrated version, simply because I didn’t have room in the...
-
