• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Ronn

  1. R

    Deere 410c hydraulic rebuild square oring

    I put it all back together, no leaks so far, but I didnt bleed anything, was I supposed too? I didnt see anything in the manual about it.
  2. R

    Deere 410c hydraulic rebuild square oring

  3. R

    Deere 410c hydraulic rebuild square oring

    Yes it goes under the brown ring, I thought about using the old one but went ahead and put the new one in. I almost got it all back together, hope it works!
  4. R

    Deere 410c hydraulic rebuild square oring

    I'm rebuilding a loader lift cylinder, first time ever and noticed an oring I got in the kit is round but the one I pulled out of the hydraulic is square. Does anyone know if it will cause me any problems if I install the round one?
  5. R

    Question about hour meter

    Yea im pretty confused by it, its hard to imagine the engine has 21k hours but i guess its possible
  6. R

    Question about hour meter

    That would be cool, picked up an old john deere 4050 engine that was part of an industrial air compressor trailer, (involved in auto-accident) for 200 bucks
  7. R

    Question about hour meter

    I noticed this hour meter had 2 digits in the white. Is this 21000 or 2100? TIA
  8. R

    Seat replacement on case 570 lxt skip loader

    Thanks a bunch I'll check these out
  9. R

    Seat replacement on case 570 lxt skip loader

    I been searching online for a used seat and cant find anything. When I search for a new case seat they are like $1000 I'd like to replace the seat without spending that kind of money, if possible.. I was wondering if anyone has bought some generic suspension seat and fabricated there own mount?
  10. R

    Case 570lxt stuck bushing

    Thanks I got it in with a bigger hammer, I'm gonna wait until I can get some dry ice before I try the other one. It almost seemed like the bushing was too big. There was metal shavings coming off inside the hole.
  11. R

    Case 570lxt stuck bushing

    Would this work?
  12. R

    Case 570lxt stuck bushing

    If that will help me install these bushings I can probably look one up online and order one. In fact I just seen something posted locally that sounds kind of like what your talking about. It had a pump, some kind of hydraulic cylinder and a bunch of attachments.
  13. R

    Case 570lxt stuck bushing

    I recently bought a case 570lxt and noticed there was some slop in a pin that connects the linkage that tilts the loader bucket. I removed the nut & bolt that holds the pin and linkage and found worn bushings. I was able to remove the old bushings and order new ones. After I tried to install a...
  14. R

    John deere 410c backhoe spool valve

    Thanks again! I found the parts, the first seal kit was around 30 bucks, and the spool seal kit is around 120 bucks. My only reason for needing the seal kits is because I want to change the deere controls over to cat controls, and the procedure (which I think you gave me) has you swap spools and...
  15. R

    John deere 410c backhoe spool valve

    Thank you, how did you find that?
See more
Top