• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Shade Tree

  1. S

    Mitsubishi MM40SR

    Thank you! That would be pretty helpful. I have a couple modules that were sent out to be refurbished and have arrived back in now. I'll be putting them on in a couple days I hope and will report back.
  2. S

    Cat MM55SR-2 does anybody else have one??

    Im sorry i didn't respond to the earlier post. Previous to that I did find it dig into it some. I found the Chinese manual and downloaded it. It gave actual part numbers and good pictures. That's how I discovered the missing glow plug timer.
  3. S

    Cat MM55SR-2 does anybody else have one??

    Thank you! @JDC21 Looks like it uses 2 relays side by side. Now I can fix that. It starts and runs good without it currently because its warm out. But will like to make it complete.
  4. S

    Cat MM55SR-2 does anybody else have one??

    Speed switch on floor might go to these wires? But not totally sure. *First Pic shows the switch and the wires I think go to it. *Second Pic is the valve they lead to. *the area shown in picture #3
  5. S

    Cat MM55SR-2 does anybody else have one??

    those wires mentioned above are here Left side of engine compartment
  6. S

    Cat MM55SR-2 does anybody else have one??

    Last wires in question for this area are these. Labeld #50 #53 orange with red blotches #54 yellow with red blotches
  7. S

    Cat MM55SR-2 does anybody else have one??

    Got glow plug timer in
  8. S

    Bomag reversing plate compactor will not go forward

    Any pictures? I'm trying to understand what all is happening. Sounds like something that can be reversible.
  9. S

    Bomag reversing plate compactor will not go forward

    Hydraulic lines accidentally mixed up?
  10. S

    bobcat 732 ford engine gas

    Got pics? I have some pinto 2.0 and 2.3 stuff. Got pics of what you're dealing with?
  11. S

    New head gasket leaking

    Once upon a time on a 12 valve. Head started leaking water outwardly near front of engine. Retorqued those couple front bolts to goot N tight and all was well for a good while. That was on a couple hundred k engine that probably never had a gasket change on. Got nothing to lose so try retorqueing
  12. S

    New head gasket leaking

    I would retorque it and see
  13. S

    Cat MM55SR-2 does anybody else have one??

    Ill be going over too it on Wednesday. I ordered that glow plug timer and get to put it then and look at high and low speed wires. Not sure at all what colors they are or where they come from. I'll probably be touching wires and hoping for the best lol. Thank you @Nige & @JDC21 for your help
  14. S

    Cat MM55SR-2 does anybody else have one??

    Thank you! That answers another mystery
  15. S

    Cat MM55SR-2 does anybody else have one??

    Thank you! that's another lead.
See more
Top