-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Recent content by Zimbo
-
Z
Pump bolt solutions
I hear your pain, torque adapters do work in most cases but have a look at the 30mm 382-6050 from your Cat dealer, actually they have a number of 30mm in various configurations labeled for rear engine mounts And can accomodate a torque wrench or breaker bar, very hand tool for pumps.- Zimbo
- Post #2
- Forum: Tools of the Trade
-
Z
CAT 3114T Engine 80 HP year 1989 wants to stall after engine starts
3114.... sleeves in head allowing combustion into fuel. Ensure the water pump belt is tight as Usually it slacks off allowing engine temp to raise and affect sleeves. Clear tube on return line out Of head will be the go. -
Z
320DL - No Start Condition
Just wanted to have a yarn with you, are you still in Zim? Im originally from Bulawayo. Have you a contact number (whatsap)- Zimbo
- Post #43
- Forum: Excavators
-
Z
C series timing pin part number
MANN Studio Check Apexinds for cheaper timing pins. -
Z
C series timing pin part number
Was the dozer a 10T? Which side did you time it on ? as the right hand side has a hole which used to have a speed sensor in it. This hole is bigger than the hole on the left which has the starter motor. Best way that I have found with the C27/32 in the dozers is to pin it in the larger hole... -
Z
Looking for resources on the basics of Heavy Equipment repair
That's the best book I ever bought on electrics.... -
Z
962k injection timing
I know that once timing is slightly out, on the pumps with the speed sensor on the back ( C6.6) the injection is disabled and can be a tricky one to troubleshoot a no start situation.