Syleng1
Well-Known Member
I don’t take my EX-120-2 off my farm. But most of my property is woods. I’ve bounced off a few trees and found my side doors were bondo city. So being I own a welding shop I decided to build the side doors out of 1/8” steel diamond plate. Rolling the tops and contour the factory doors to match took a little bit of trial and error. Paint to match and the doors fit really well. I even did the same for the fuel tank and used 6” schedule 40 steel pipe to protect the fuel fill. I was glad to throw out the old sheet metal. Next is building a cage for the cab and some horizontal rub rails for the lower belt line. Maybe she will get a new coat of paint this summer. Just thought I would share. ![IMG_4061.jpeg IMG_4061.jpeg](https://www.heavyequipmentforums.com/data/attachments/293/293239-be684d5451261896fb730cbb954c199b.jpg)
![IMG_4059.jpeg IMG_4059.jpeg](https://www.heavyequipmentforums.com/data/attachments/293/293240-c43b14cd7877904547f543e42422ad03.jpg)
![IMG_4063.jpeg IMG_4063.jpeg](https://www.heavyequipmentforums.com/data/attachments/293/293242-3caf64d560fbaf281c2880778657cb32.jpg)
![IMG_4062.jpeg IMG_4062.jpeg](https://www.heavyequipmentforums.com/data/attachments/293/293241-55e1d40e5c69cf9194934539058d88cd.jpg)
![IMG_4061.jpeg IMG_4061.jpeg](https://www.heavyequipmentforums.com/data/attachments/293/293239-be684d5451261896fb730cbb954c199b.jpg)
![IMG_4059.jpeg IMG_4059.jpeg](https://www.heavyequipmentforums.com/data/attachments/293/293240-c43b14cd7877904547f543e42422ad03.jpg)
![IMG_4063.jpeg IMG_4063.jpeg](https://www.heavyequipmentforums.com/data/attachments/293/293242-3caf64d560fbaf281c2880778657cb32.jpg)
![IMG_4062.jpeg IMG_4062.jpeg](https://www.heavyequipmentforums.com/data/attachments/293/293241-55e1d40e5c69cf9194934539058d88cd.jpg)