• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. P

    Lombardini Kohler LDW 1003 Won't Shutdown

    Sorry I missed this. This is in a wacker compactor. I took off the valve cover and did not see anything standing out to pull the rack off. Rack moves smoothly. The adjustment on the side that is in the book does not apply to mine apparently because that screw to adjust is not even present on...
  2. P

    Lombardini Kohler LDW 1003 Won't Shutdown

    Hey folks - we have a Lombardini (Kohler owned years) LDW 1003 (3 cylinder diesel used on basically everything) that will not shutdown when you turn the key. If you pull the 1 wire off the fuel shutoff solenoid it still won't shut off all the way. No matter how you pull power from the shut off...
  3. P

    Doosan Light Tower....2 lights work 2 dont

    The old ballast is largely illegible - the new one is a universal so I am told. Right now I think I have the OK to rewire for LED. So I have a 110V, common, and ballast wire for each light (at the ballast connections). I need to make the sockets run straight 110V now. Assuming I need to find...
  4. P

    Doosan Light Tower....2 lights work 2 dont

    I rewired the new one in like the old one I pulled. Except my new one has more taps for different voltages. Yes bulb is definitely good as I swapped it around.
  5. P

    Sullair under speed problem

    Me too. If I was a betting man I would go with 4024 :eek:
  6. P

    Doosan Light Tower....2 lights work 2 dont

    It wasn't my choice to get this ballast but I think you are right so I am going to have them go LED i think. So how do I bypass the ballast and cap? I have the three wires I mentioned above...if I want to get regular 110V to the mogul bases what do I do at the ballast to get rid of that junk?
  7. P

    Doosan Light Tower....2 lights work 2 dont

    So just got to this tower because we need it running soon. I purchased a GE brand ballast and capacitor came with it. The new ballast has a number of wires - I believe called a 5 tap. The ballast I removed had 3 wires. 1 wire that said COM, 1 wire that said 110V, and 1 that went to the...
  8. P

    Doosan Light Tower....2 lights work 2 dont

    Yes mogul base BT37 bulb! I didn't realize LED conversion was just about getting line voltage to the sockets. I can do that. The machine makes 120V at the regular plug. Where would you suggest I check for voltage before ordering LED bulbs? When you do these upgrades do you just cut out the...
  9. P

    Doosan Light Tower....2 lights work 2 dont

    Heres where I am at on this tower: All 4 bulbs work. I switched the ballast/capacitor combos around and got the other bulbs on. I then moved the wires around for the switches and confirmed both switches work. Right now the top two bulbs come on and that cooresponds to the correct switch (I...
  10. P

    Doosan Light Tower....2 lights work 2 dont

    Thanks @The Peej ...I dont think they're gonna do the LED upgrade but maybe in the future. Its a nice unit but the part that stinks is nobody can tell me if they saw 1 light go out and then the second go out of if they both went out at once. Do you see any reason I couldn't swap bulbs first to...
  11. P

    Doosan Light Tower....2 lights work 2 dont

    Hi all. We have this late model Doosan light tower (I think about 2011-2012?) and 2 of the lights don't fire up. Before I start digging in with test lights I wanted to see if anyone could point me in the best direction to start. We put a new capacitor in it to make 60Hz and 120 volts...
  12. P

    Deere Engine Cross Help

    No but I will
  13. P

    Deere Engine Cross Help

    I'm in MD
  14. P

    Deere Engine Cross Help

    One other question: is the dealer the best source to figure out if these 2 engine serial numbers interchange? I can pull them up on the deere app but want to be sure before having customer buy. Is there a website with better information than the Deere Power Assist app?
  15. P

    Deere Engine Cross Help

    Thank you Dave! I am going to have to lookup each replacement engine via serial number and compare then.
  16. P

    Deere Engine Cross Help

    Replacing engine on a Deere 310J. As long as I swap my accessories/flywheel/adapter I should be OK with a new long block 4045 engine right? Non-turbo to non-turbo. Just want to make sure there isn't a curveball in there.
  17. P

    Ingersoll Rand/Isuzu Diesel on Runs with Key ON

    Gotcha - makes sense. I'll clean the grounds but maybe add a block to frame/battery ground to ensure everything attached to the block is grounding. Will report back.
  18. P

    Ingersoll Rand/Isuzu Diesel on Runs with Key ON

    Thanks. Gray is power for sure. So can you help me understand a little better. When I unplug gray (and manually hold fuel lever) it will crank and run. So I am guessing gray isn't getting power right? I will check with volt meter tomorrow but if it was getting power the solenoid would move...
  19. P

    Ingersoll Rand/Isuzu Diesel on Runs with Key ON

    Really scratching my head here. If I by pass wire the oil pressure, water temp, and 2 air end sensors then what else is left? I don't believe there is a low fuel shutdown on this machine because there isn't anything going to the tank. I definitely have 12V going to both sides of each switch...
  20. P

    Ingersoll Rand/Isuzu Diesel on Runs with Key ON

    Trying out the brain trust again on this one before I do any further digging...got the same machine in again (different machine but same engine and wiring diagram). This one will not crank until I unplug the gray wires that go to the fuel shutoff solenoid. Just to do some diagnostics I checked...
Top