• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Q

    613c speed reducer leaking oil.

    Is the hydraulic motor seal leaking oil into the speed reducer? I.E. the leak is bad enough the case drain hose on the motor can't carry the oil back to the reservoir fast enough?
  2. Q

    Cat GP25 forklift online manuals?

    I tried using SIS and received the response "unable to retrieve content." Cat GP25 gasoline model s/n 5AM01704. I've not dug into these previously. I wasn't sure if the Mitsubishi machines were supported by Cat, or limited to lift truck dealers. The machine has no spark. I have power going...
  3. Q

    Aftermarket cab pressurizers?

    I asked further questions of SyKlone. They do offer brushless motors. About $2000usd to set up a machine. The reseller for SyKlone was clueless about all the different options.
  4. Q

    Aftermarket cab pressurizers?

    cleanairfilter.com is another one. The SyKlone systems use brushed motors. I'd prefer brushless.
  5. Q

    Aftermarket cab pressurizers?

    Are there other brands of cab pressurizer fan/filters on the market beside SyKlone. I see pictures of scrapers in Australia that may have a different brand mounted on the cab roof.
  6. Q

    Terex TS14G S/N breaks for each model year?

    Our dealer is RECO Equipment in Monroe, OH. It would be very helpful to them if you have the harness part numbers ready if you call them. Some harnesses may be at their warehouse in West Memphis, TN. Others may have to be sourced from a supplier in Europe. That is where the back order time...
  7. Q

    Terex TS14G S/N breaks for each model year?

    Which harness? Many are still available, but may take 6-8 months to receive them.
  8. Q

    Deere machine that used a Funk DF250 transmission?

    Terex TS14G. Phil Thomson, Wanaka NZ switched two machines. Tight fit but very successful. The donor transmissions were originally destined for S17Es. A few Astra ADT250 dumpers used DF250 transmissions. None that I can find were sold in the US.
  9. Q

    Deere machine that used a Funk DF250 transmission?

    Yes. Replacement for a DF150 transmission that is too light and suffers frequent failures
  10. Q

    Deere machine that used a Funk DF250 transmission?

    What John Deere machines were equipped with the Funk DF250 transmission? My first attempt at a part number search showed a 640D, 640G, 640GII log skidders. Later attempts of the part number revert to the DF250 parts catalog which are no help. Were there any graders that used this...
  11. Q

    K Tech scrapers?

    We have a 1228 coming soon. No sandy soils here.
  12. Q

    K Tech scrapers?

    I really don't want a single one much larger than 26 yard for that reason. We only have a D6 for a pusher some of the time
  13. Q

    K Tech scrapers?

    Currently we unhitch the second Eject 80% of the time as conditions are too wet or job sites are too small. Cat self propelled are too heavy for our wet conditions. We have two TS14Gs
  14. Q

    K Tech scrapers?

    How are the smaller ones holding up long term? They've been out long enough to show the start of problems. How do they perform in wet heavy woodlands clay. K Tech's marketing is right up there with Anderson windows here in the United States. We have experience with Miskin, Deere, Eject. We...
  15. Q

    2001 scraper Terex ts14g not shifting

    There are two solenoids energized for every gear selected, forward or reverse. Numerical 1-4 and alphabetical A-D. Check for magnetism at the energized solenoids based on the gear selected. Check at each solenoid connector between the two female pins for voltage. This should narrow your...
  16. Q

    2001 terex ts14g with 2002 international problems throttling up

    The rear engine ECM is powered by a fuse in the small electrical box mounted to the frame rail near the rear starter. Check that fuse and power to that circuit. There is only one fuse and a relay in that box. The relay can also cause that problem. That relay must be a 24V. 12V versions will...
  17. Q

    2001 terex ts14g with 2002 international problems throttling up

    Forward of the accelerator pedals, find the three pole Weatherpac connectors that attach to the accelerator pedals. It will have a blue, red, and black wires. Find the one with a red wire tagged 916(B). This is the 5V feed to the front TPS. I crimped another red 18ga wire onto it. Find the...
  18. Q

    2001 terex ts14g with 2002 international problems throttling up

    Those were the green ones. The ones in question are the white white machines
  19. Q

    2001 terex ts14g with 2002 international problems throttling up

    You likely have a broken wire or bad connection, between the throttle position sensor and the engine ECM. I need to look through my information in the next few days and get back with you, but the ECM views the TPS position and Idle Validation Switch voltage relationship. At slow idle the ECM...
  20. Q

    1810E JD Scraper Pan Issues

    Do you have a coupler tip not allowing return oil on that circuit back to the tractor? Seen it many times.
Top