• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. S

    CAT 262d doesn’t move in any dieection

    Out of curiosity are those procedures in SIS or Component Based Troubleshooting?
  2. S

    CAT 262d doesn’t move in any dieection

    Base has B+ and B- at appropriate pins. Yes I watched the video which specifically says “once the report opens it has already been saved”. In this case it SAVED ITSELF as an XML file. This file type is NOT upload-able to this forum. So I zipped it. You can UNZIP it and view it in Microsoft Edge.
  3. S

    CAT 262d doesn’t move in any dieection

    X and Y axis of LH joystick has "VOLTAGE ABOVE NORMAL". I have visually checked the wiring, done a wiggle test with the software live and have seen no changes. I am going to replace the joystick base 456-1068. Thoughts?
  4. S

    CAT 262d doesn’t move in any dieection

    First I would run report, then cycle battery to see if it moves briefly as suggested prior, then trouble shoot suspected based on available codes, if no codes then check I/O as described. I’m convinced the park switch is fine. I do however suspect the “ass in seat” switch.
  5. S

    CAT 262d doesn’t move in any dieection

    Thank you!
  6. S

    CAT 262d doesn’t move in any dieection

    I hear you. Thank you. I have some time on my hands today while I wait for my kids. I never stop thinking, specifically about skid steers. Just thinking out loud.
  7. S

    CAT 262d doesn’t move in any dieection

  8. S

    CAT 262d doesn’t move in any dieection

    This just in from the owner: Parking brake light does NOT go off when switch is depressed. I WILL scan with ET but my thoughts are to check Parking brake switch and input wiring, check parking brake solenoid and output wiring, check OPERATOR IN SEAT switch and input wiring. It will still be a...
  9. S

    CAT 262d doesn’t move in any dieection

    Th Thanks. I will do just that. It may be few days before I get to it though.
  10. S

    2018 Bobcat T550 No Fuel at 3/4 tank

    Likely pickup tube cracked. You might be able to sneak your hand under the pump(from the cab side) and pull it out. It’s possible in T650.
  11. S

    CAT 262d doesn’t move in any dieection

    Thanks for the reply. Great information. I do have Cat ET.
  12. S

    CAT 262d doesn’t move in any dieection

    I have not connected software. I have not checked for codes. I will as soon as I get to the site. It may have advanced monitor but I do not know as of yet.
  13. S

    CAT 262d doesn’t move in any dieection

    Cat 262d s/n DTB01929 does NOT move in any direction. The boom DOES lift and tilt. What are some common causes? I’ve reveiwed the hydro and electric schematics somewhat. It appears this machine is a “drive by wire” and doesn’t have actual hydraulic pilot controls. It seems the LH Jiysric has an...
  14. S

    Takeuchi TL130-Problems-Wont Move

    Another service manual request. Please and thank you. TL140 [email protected]
  15. S

    Bobcat S250 Drive Noise

    Can you call me?
  16. S

    Bobcat S250 Drive Noise

    Does your valve plate have a brass/copper color on side or is it all steel/gray?
  17. S

    Bobcat S250 Drive Noise

    All JIC, 4,6,8,10,12, maybe 16. You will need at least 4 each of #12 and #10. The others 2 each should do. Buy a couple Amazon kits.
  18. S

    Bobcat S250 Drive Noise

    Your pump didn’t likely send debris to your drive motors. That case drain you showed earlier is it shared with your hs pump case drain? I think so. What is your serial and I will get the diagram. The “case” portion of your left hand HS Pump is common with the “case” section of your right hand HS...
  19. S

    Bobcat S250 Drive Noise

    I quoted the wrong thing above. My bad. Basically I do not believe your drive motors will destroy your new pump like another post said.
  20. S

    Bobcat S250 Drive Noise

    This is not entirely accurate. Many bobcat hs pumps will case drain the debris and the filters catch most of it. As the brass breaks off the piston it falls to the bottom the hs pump and is case drained away to the cooler then then filter. A piston pump cannot “pump” if it has no brass slipper...
Top