• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. F

    773 G w/ hand controls & arms that drift downward

    I should get the cylinder back on Wednesday and I'll find out if that fixed it. However, if it still does it, I imagine that I'll have to rebuild the valve body. Can new o-rings and such be installed while the valve body is in the machine or do you need to disconnect all of the lines and take...
  2. F

    773 G w/ hand controls & arms that drift downward

    Thanks for the ideas. I ran the machine more today and checked the tempurature of the lift cylinders after everything was warmed up. I had one that was slightly warmer than the other (I figured hot hydralic oil was passing through this one) so I pulled it off and I'm going to have it rebuilt...
  3. F

    773 G w/ hand controls & arms that drift downward

    I have a 2001 Bobcat 773 Turbo with hand controls. Recently the lift arms have been seeping down ~ 6-8 inches immediately after the arms are raised. It will seep 6-8 inches downward and then stop. What's more is that when I roll the left hand control outward to begin raising the arms again...
  4. F

    Aux Hydros Not Working!

    Test Post Checking...
  5. F

    763 Bucket controls wont engage Traction lock

    I have somewhat of a related question. I have a '01 773 (G model I believe) with hand controls. The lift arms are starting to creep down several inches after I raise the arms... the seem to settle rather rapidly. What's more, when I roll the left had control outward to lift the arms, they...
  6. F

    skid steer controls??

    Test
Top