• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    Multiple Event codes on 299d2

    Getting 350-3 lift linkage voltage above normal, 723-2 engine speed sensor #2 data erratic intermittent or incorrect and 636-2 engine position sensor (I didn’t get a pic of this alert but think verbiage was the same as 723-2). I have searched the forum and found t shooting procedures posted by...
  2. C

    Starting 299d2 after fuel/water separator repkacement

    I am out in the field and tried to search forums. Don’t see this. Machine throwing fuel leakage code. Canister fuel filter and separator element were filthy. Changed them. Can’t get fuel to prime the system. Should lift pump pulse constantly when key switch is on but engine not running? I am...
  3. C

    299D2 Intermittent Severe Fuel Leak Alarm

    2018 machine. Full of fuel and DEF. Intermittent alarm. Doesn’t show up as active event or logged event. Attached pic. **** machine off and it clears and comes out of limp. Help.
  4. C

    Bobcat T86 Door

    Looking at a T86 that is online. Doesn’t look like it has a ballistic door. Is the OEM door compatible with forestry attachments?
  5. C

    CT322 sticks out of alignment

    Had the cab up to replace a hydraulic hose. Got everything buttoned back up but noticed the control sticks are out of alignment. If you thought about them as hands on a clock they are about 60 minutes out. Any ideas?
  6. C

    Troubleshooting hydraulic leak on Deere CT322

    While changing tracks on the machine I developed a catastrophic leak in the hyd system. We were bumping the left drive to aid in getting new track over front idler pulley. I heard a pop and the hyd oil flooded out from underneath the machine. After raising the cab and removing sheet metal to...
  7. C

    Ct322 Manually raising boom

    2007 model. Changing tracks and while bumping hyd drive to roll new track on I get a loud pop under seat and hyd oil floods out of pan. Boom is down and of course I have no hydraulics now. Tried to raise cab but can’t get it up. Any way to release pressure to raise boom manually without cracking...
  8. C

    Normal display voltage for Cat299d2

    I am going from one problem to another. Got most recent problem, couldn’t get attachment off, to voltage issue. What is normal read out on display screen for voltage if alternator and battery are in good shape? My JD CT322 reads charging voltage of the alternator. Usually 13.8vdc to 14.1vdc. I...
  9. C

    Cat 299d2 Hydraulic coupler problems

    I was hooked up and locked in to brush cutter attachment. I noticed while using it there was more movement on the deck that I was used to. The left side of the attachment is off the boom but still locked at bottom. The right side is engaged and locked. I can’t seem to get it hooked back or the...
  10. C

    Removing hyd drive speed sensor Cat 299d2

    Trying to remove speed sensor to inspect. After removing the nut that retains the hose/sheath for the sensor at the drive I find that it will not pull out with gentle tugging. Any help appreciated.
  11. C

    Cat 299d2 door replacement

    Replacing door glass on my machine. Is it better to remove hinges and install safety escape handles than to try and install levers for safety handles with hinges bolted to machine? I tried the latter and don’t have enough hands to hold everything.
Top