• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    International td14 no diesel fuel

    The tag on the pump is Ih65314da. Yes, the rack was stuck, but I thought I had it freed up. I have about a 1/4 to 3/8 inch of movement on the rack. Is that enough movement? you access it by removing a cover on the top right side of pump and it was a real bear just to free that much andI was...
  2. R

    International td14 no diesel fuel

    My td14 starts on gas, but cannot get diesel fuel flow. I have fuel to the injector pump, but nothing coming out. I could only find one strainer on this model and it was clean. I s there any thing else I can check or do myself, or does the pump have to be removed and repaired by a shop? This...
    • ronm
    • Thread
    • Replies: 3
    • Forum: Dozers
  3. R

    TD14 wont run on diesel

    Once again, I need help with my old td14 dozer.It has sat for the last two years because I couldn't get it to start on gas. finally got it to start on gas, but now cant get it to run on diesel. I have diesel fuel flow through the filter and to the pump, but nothing to the injectors. I...
    • ronm
    • Thread
    • Replies: 0
    • Forum: Dozers
  4. R

    955 Steering problem

    Thanks for the info. I’m embarassed to say, I ran it to low on transmission fluid. Filled it with pretty expensive fluid and works great. Thanks again, Ron
  5. R

    955 Steering problem

    I have an older cat 955 that doesnt get used very often. Last few times I've used it, the steering gets very stiff. It may start out fine with just finger strength to turn the machine, but at some point the steering gets so stiff I can hardly pull back the clutches at all. Sometimes when your...
  6. R

    TD14 won't start on gas and no fire at plugs

    OK heres what I know now. I found the wire from the points to the condensor and the wire from the magneto. the points and mag wires apparently screw onto the condensor. However, the magneto wire reads a short to the chassis at all times which in turn shorts out the points and the condensor...
  7. R

    TD14 won't start on gas and no fire at plugs

    Wow, Thanks for all the info. I replaced cap and set the points at about 13thousands (per a book on a td 14A). I could not find a wire from the magneto that might be grounded, is that underneath the mag are where else might i look? Just to be sure I understand, youshould be able to see an...
  8. R

    TD14 won't start on gas and no fire at plugs

    Wow, Thanks for all the info. I replaced cap and set the points at about 13thousands (per a book on a td 14A). I could not find a wire from the magneto that might be grounded, is that underneath the mag are where else might i look? Just to be sure I understand, youshould be able to see an...
  9. R

    TD14 won't start on gas and no fire at plugs

    I need help with an old TD14. This is a farm machine as a result gets used very little. Started and ran last year, parked and won't start now. Now i have no fire at plugs in the gas position, how do you check a magneto? Not sure where to start at this point.. Thanks Ron
    • ronm
    • Thread
    • Replies: 11
    • Forum: Dozers
  10. R

    international rd14 steering clutch removal

    I thnk I've got it all back together, but havnt had a chance to try it because of weather. It only get used a few days a year now and is pretty much on its last leg. I believe I have a cracked head, so every time I use it I have to drain some water out of the unit to keep the plugs dry...
  11. R

    international rd14 steering clutch removal

    Steve, thanks, with your help we finally got the clutch out and it was pretty much welded together with rust. Managed to separate them all, grind as much rust off as I could and reassembled. Now its a good news, bad news thing. The good news. I now have left hand steering finally after about...
  12. R

    international rd14 steering clutch removal

    My address: Will keep trying, I don't know about a redpower forum. Do I get to it from this website? My address isRon Moore, 9556 Ehlers Rd., Stover, Mo 65078. Steve, enclose a bill, I appreciate what your doing, but sure don't expect you to be out any money... Tks again
  13. R

    international rd14 steering clutch removal

    Steve, I'm making headway. I got the cover off and now am facing another problem. Hopefully the last to get the clutch out. I can see that the clutch is all rusted up, so I think that's my original problem. How od you get the vertical gear that pushes the clutch in and out loose from its...
  14. R

    international rd14 steering clutch removal

    Steve, thanks for yourhelp. The only manual I have is an owners manual that I got with the machine and it is for a td14. I couldn't find any model # anywhere, but the owners manual seems to be close to mine and I know its a 50's model. Would a seized brake cause it to kill the engine when...
  15. R

    international rd14 steering clutch removal

    No I don't have any books the only info I have gotten is from this forum and you tube. It appears that something is holding that plate from underneath and I cant see what it is. Any information you can give me would be greatly appreciated.. Ron
  16. R

    international rd14 steering clutch removal

    I have a td14 that the left hand steering clutch does not work. When I try to engage the clutch it trys to kill the engine. I'm trying to remove the clutch to clean the pads. How do you remove the gear shift mounting plate that bolts to steel floor to gain access to clutch. I have all bolts...
    • ronm
    • Thread
    • Replies: 13
    • Forum: Dozers
  17. R

    Cat 955

    Bob, I just added 2 & 1/2 gallons of oil to each of the two fill ports and was still not able to read anything in the dipsticks. Yet the machine still runs fine after warm. Do you know what the oil capacity o Tito oil is? Thanks Ron
  18. R

    Cat 955

    Thanks for all the information. Do I need to have the machine running or warm to check levels. Is there a website or place I can go to get specifications on lubricants and etc. for this machine.. Thanks Ron
  19. R

    Cat 955

    Bob, I hate to sound stupid, but is the breather the bolt that appears to be painted yellow and is directly to the left of the dipstick in the first picture? That is the one that is stamped engine oil only. Thanks
  20. R

    Cat 955

    Just so I'm clear, use sae30 Tdto oil in both places. Do I then add oil thru the dipstick? Thanks
Top