• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. FlyingCat

    Cat 226B engine replacement

    Progressive Diesel Injection in New Castle, PA quoted me at $325. I don't think anyone charges less than that. I ordered it.
  2. FlyingCat

    Cat 226B engine replacement

    Is it even possible to put the front cover on without lining up the pin? I don't recall how I was able to determine where the oil pump cover hole was supposed to be but I don't recall it being an issue. I think I put the front cover on loosely, saw a little scratch mark on the oil pump cover...
  3. FlyingCat

    Cat 226B engine replacement

    After looking at everything, this makes sense. The tool only sets the position on the idler hub and pump shaft. The inner rotor will spin as the idler gear spins but the shaft shouldn’t move.
  4. FlyingCat

    Cat 226B engine replacement

    Yeah the pin on my front cover is intact and I made sure to line it up when I installed it. I went on JustAnswer and they said use the tool, put locktite on the threads on the back of the shaft, and pack the pump with grease. Which okay, that’s basically just following the manual. Not sure if...
  5. FlyingCat

    Cat 226B engine replacement

    Yes it does align the oil passages in the idler hub with the passages in the block but it also sets the position of the pump shaft with idler gear and sets your gear mesh between the crank and cam. That pump shaft is a little off center on the idler hub, so if everything else was done correctly...
  6. FlyingCat

    Cat 226B engine replacement

    Does anyone have the tool and care to rent it to me? I have another idler gear ready to go in. I'd be happy to ship it back to you after I'm done. I know, you're taking my word for it.
  7. FlyingCat

    Cat 226B engine replacement

    When I finally got it started after replacing the two fuel pumps (started within 10 seconds of cranking once the fuel lines were primed), I noticed there was oil coming from the exhaust flange between the turbo outlet and muffler (even though I replaced that gasket). The next day when I had more...
  8. FlyingCat

    CAT 226B oil pressure weirdness

    Any update on either of these issues?
  9. FlyingCat

    Cat 226B Skid - Starving for Fuel

    Also another idea is to check your oil. If it smells like fuel your injection pump is probably leaking and would definitely affect your power.
  10. FlyingCat

    Cat 226B Skid - Starving for Fuel

    Maybe check for any melted or smooshed fuel hoses. I had that issue on a brake line once. The hose was melted from rubbing against the tire and fluid wouldn’t flow freely. Forced the caliper to stick and the rotor to get really hot. Probably not likely but worth a look. I’m having an issue...
  11. FlyingCat

    Cat 226B engine replacement

    Removed the mounts from the block today and set it on a block wood. While the additional movement didn’t seem like much, it allowed me to get my hands to the bolt holes easier where I could align the holes with a punch in one hole while starting a bolt in another. Once I got the 3rd or 4th bolt...
  12. FlyingCat

    Cat 226B engine replacement

    Thanks. I went to the Cat dealer and talked to the service mgr about it because I know not long ago he was wrenching in the garage. He basically said the same thing. Disconnect the mounts and set it on a 2 x 4 and get two bolts started at 3 and 9 to line up the spline then just wiggle and turn...
  13. FlyingCat

    Cat 226B engine replacement

    Hey guys, I'm new to this site and am glad to have found it as it seems like a really good source of information. I bought an 04 226B with a ceased engine with the intent of rebuilding it for less than I can replace it. I bought an overhaul kit from Friday Parts, hope their stuff isn't garbage...
Top