• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. W

    CAT 299D2 XHP attachment function problem

    @Nige I don’t have the electrical schematic for the CTL it’s the d5 I have. Just to clarify. Machine serial DX204 The high flow pins K&N to Pin B?
  2. W

    CAT 299D2 XHP attachment function problem

    Hi all, I have a problem with my CTL. I have a 3rd party MC box grader run from Leica. I have a 14pin connector plugged in to the CAT for the raise, lower on left and right of the grader which is by the buttons on the joysticks. My problem is I have lost the function of the top left button...
  3. W

    CAT 313 Next gen Tilt bucket sensor?

    @Nige not sure if this is something you may have come across?
  4. W

    CAT 313 Next gen Tilt bucket sensor?

    Hi all, As per title. I have purchased a new 313 next gen which I am putting on my Leica 3D system with semi auto function. I would like to run it semi auto with tilt bucket but I can't seem to find any information on tilt bucket sensor for it. Any clues? TIA
  5. W

    CAT D5K2 with Leica MC1 setup problem

    Hi all trying to setup my Leica mc1 on my d5k2 dozer. dozer is 2018 model with grade control and accugrade built in. I had the can test message saying no connection last week so had cat out to plug laptop in as apparently SEA code not installed (cat technician plugged laptop in and said yes...
  6. W

    Cat D5K2 2018 grade control not working

    So. Trying to can test the Leica and the dozer isn’t going into auto. It says it’s connected to transmission levelling etc but when I do the setup the auto switch isn’t working (grade control now working)
  7. W

    Cat D5K2 2018 grade control not working

    Leica has its own slope sensor. I jumped back in half hour later and had some random success. (See pic) also by putting the traction control button on made the fault appear this morning.
  8. W

    Cat D5K2 2018 grade control not working

    Ive had Cat engineer come out to have a look. He said the machine has already Accugrade, Slope assist and stable blade already installed so the machine control engineer sent me image of the error and I'm left in a quandary as the below image shows the Leica kit not connecting but the dozer is...
  9. W

    Cat D5K2 2018 grade control not working

    Still fault finding on the in built grade control. however I have had the machine control engineer out to fit the Leica MC1 kit I already have and the SEA code has been removed. Why would it have been removed if it were installed before? I’d have thought it would be to the machine and not the...
  10. W

    Cat D5K2 2018 grade control not working

    Im confident, perhaps too eager to solve it and wanting to pin point the problem straight away. I have removed the offside bonnet panel and have found the entire sump full of sand and silt which covered the power supply pack. Having a good unplug and clean mission on the connectors,. (fingers...
  11. W

    Cat D5K2 2018 grade control not working

    Had a look through and couldn’t find anything obvious so left thought I should just lump it and give up on trying. Anyway… Jumped in dozer this morning and turned it on and hey presto it’s working. I didn’t even touch anything, only looked. leaving me to believe that it may be a function that...
  12. W

    Cat D5K2 2018 grade control not working

    Just added it to cat app and this is what it throws up. Going to look at connections and harness today
  13. W

    Cat D5K2 2018 grade control not working

    For both the on board control system and for utilising 3D be it Trimble or Leica?
  14. W

    Cat D5K2 2018 grade control not working

    Just heard back from Sitech and they have said that “Grade control system installation status” “Not installed”. no SEA code installed
  15. W

    Cat D5K2 2018 grade control not working

    Just a thought… Would anything be unplugged if it were running a guidance system? haven’t looked at the harness yet.
  16. W

    Cat D5K2 2018 grade control not working

    Here’s the pics I have from diagnostic screen
  17. W

    Cat D5K2 2018 grade control not working

    0002 - Active diagnostic not present 0009 - Calibration Aborted by ECM then Factory reset says: Error Setting Factory Defaults Serial Number is: KY203539
  18. W

    Cat D5K2 2018 grade control not working

    As per title. Hoping for some good news. The grade control on my D5k2 has *** where it should read the live sensor position on the screen. The machine was imported (genuinely as a used machine from the USA to U.K. Finning). Tried doing calibration and it comes up with error and also...
    • Wilj
    • Thread
    • Replies: 49
    • Forum: Dozers
  19. W

    Cat 299d2xhp hydraulic flows

    No worries. I have solved the issue (hopefully). I was running the grader through the 1/2” (U.K. size) and not the 3/4” (1” U.K. size) pipes so it was creating a buildup for return pressure. serial number is dx204524 and here is a pic of the plug
  20. W

    Cat 299d2xhp hydraulic flows

    I have a laser box grader (Sharpgrade) on my 299D2 XHP. The grader I have has another attachment on which is a power rake / Harley rake that uses the same hydraulic manifold on the grader. Running it through the 1/2" hydraulic ports ran the power rake too slow so I put a jumper cable on the...
Top