• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. D

    200 dash 7

    conroy mc barnett did you ever get your 200 dash 7 going just would like to know
  2. D

    762 john deere scaper for sale

    762 scaper for sale iin holly pond alabama runs good trans rebuilt about 1000 hrs ago tires good chain good pan in good shape last job was 500 foot chicken house pad all the dirt was at rear of house. trans built by clark dealer.
  3. D

    komatsu 200 dash 7

    all hyd went out peck on little valve with four bolts works little then quits know out all together they say has 500 pound presser mine dont have but 100 when warm . they will have tomorrow hope that fixes it.
  4. D

    what temp does d5h engine run and trans normal

    i have 2 d5h one with cab and air one open cab have had heat problem with open cab went thought steering cluches and brakes steering control valve pulled trans went though it found bearing craked and metal in cluch seals put back in it still runs around 220 but dont set light off now . we put...
  5. D

    wiring harness replace t200

    any good way to do it, or just bow up and do it.
  6. D

    d5h air conditioner

    new evaporator coils in raditor and new raditor fixed the problem blowing cold. thank you
  7. D

    d5h trans heat fix

    check all for air leak on sucken side found half oring on test plug on top of filter base. think i got it fixed . thanks for all the help ,stay safe and god bless. the little things count, was doing stall test, and drive shaft would not stop changed oring and drive shaft would stop right now ...
  8. D

    200clc pump coupling

    any body have a parts brake down of pump coupling and drive. thank you ff200cx 507818 sn
  9. D

    d5h trans question

    has anyone had a trans control valve wear enough to release enough oil to keep from cooling trans. had one years back on 10k6255 d 6 c do it ,run tractor with top off trans could see oil by pass. the way the valves are in d5h is on back and oil would pore out. sn 3md442
  10. D

    d5h stalls at low rpm

    d5h 3md 442 sn. this tractor seams to be low on oil flow the tractor runs trans hot after about 2 hrs i have worked control valve (cat did it) went through steering clutch and breaks linkage presser is good no metal in filter. knowing that trans gets oil first and cooling with what is left...
  11. D

    nagging trans heating

    d5h 3md442 sn stright blade power shift, michine history had 3057 hours when bought trans had aluminum,piston in cluch packs quit sealing put steal back at about 5000 hours lucked out cat had just had same problem with on they built so that went well with there help it would miss shift in about...
  12. D

    eh 45 new holland

    what is out there for final drive ,friend has one shot.pulled apart broke shaft chewed gears wore bearing houshing real bad shape
  13. D

    in todays sick mined eq

    it is bad enough to have a hard part fail, now we have to think of eq having a mind of its own. like if it does not start we have to think hard part bat, starter, fuel or is it the brain they put in it not thinking this time. times have changed, some good some bad .
  14. D

    what is it with bobcat

    i have a t200 been a good machine parted last week, came back a day later no start looked at fuses batt termals wires called dealer have power coming in to keyless panel but none going out no light up of any other panel cross starter it turns over, dealer says it keyless panel go get it same...
  15. D

    t 200 no start

    t 200 bobcat parked a day or two went back no start keyless panel wont power up ,power on red wiire on panel but when push yellow button no power going out nothing lighting up. checked bat ,fuses fuse link on bat, cross starer will turn over, but no start and no power out of panel, bob cat said...
  16. D

    hyd pumps on track hoes komatsu

    how to know when you have pushed your limit, 1991 dash 5 every thing works as should 10000 plus hrs, how do you know to rebuild, to keep from having a pump to come a part.
  17. D

    cat has a 5 to take the place of 6n

    saw where cat is making a new high track to take the place of 6n the 5 is going to fill that spot .
  18. D

    army d7g

    serial no 3zd00850 ar no 5r7801 with 3306 engine serial no 8z48407 and ar no 5r7776. would like to know what small pipe from muffler to air cleaner does, and does it need to keep it. rotted off and want to just patch hole in muffler,if it will be ok to do so. thank you very much
  19. D

    tilt cy rod

    Does any one know rod part number for tilt cy on d5b serial number 25x 1279 my parts book does not cover hyd cy or blade, and serial number of a stright blade 10 foot wide. thank you very much.
  20. D

    D 5 H PARKING BRAKES

    D5H BRAKES SEEM TO BE ON A LITTLE HAVE CHECKED LINKAGE THEY ARE FREE WOUNDER IF THEY HAVE SEALS IN BRAKE VALVE LIKE THE RESOLER VALVE IN HYL VALVE
Top