• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. I

    MANITOU R522-4TC Reach Chief Series B

    Found the serial # stamped on the right top frame rail. Right on top of the lift point. Maybe this will help some one else. Thanks for the replies.
  2. I

    MANITOU R522-4TC Reach Chief Series B

    OK. thanks good info! I realise this is a older machine, but virtually nothing to be had on the net. Went to local Gehl dealer today to see about manuals, but need a serial #. No serial plates that I can find. Is it stamped on the machine somewhere?
  3. I

    MANITOU R522-4TC Reach Chief Series B

  4. I

    MANITOU R522-4TC Reach Chief Series B

    Searched the forum and posts are at least 5yrs old Looking for a service and operators manual for Manual for a Maitiou R522-4TC. Need to change out hyd hoses in boom and cylinder repack if needed. Any pointers to do this...
  5. I

    case 1150 b equalizer bar

    Just bought a case 1150 b with suspension beyond shot. Parts places say put steel blocks in and weld them in. I see where to put them,is there anything else to weld up? The front of the track frames are spread out somewhat, and this makes the rail want to walk off. Is there any way to fix this...
  6. I

    D8K Ring gear

    Problem solved...... new bevel gear shaft not available.
  7. I

    Zieman trailer: fix or ditch

    I'd say gopherit:)
  8. I

    D8K Ring gear

    Hi all, been awhile since I've been on here. Starting back with 8K after trans rebuild. My question is how much radial movement is acceptable in the ring gear and carrier when the bolts are fitted, but not tightened. The bolts are fairly snug in the ring gear, but considerably looser in the...
  9. I

    Td8e repower

    Check out the Red Power forum. The folks over there will help you out. Keep us posted.
  10. I

    Buycrus Erie 38b

    Hi all, where would I find the machine or serial number for this crane? Have no experience with friction machines, and needing to get the correct manual. Has air controls and bought a manual off e bay, but was for a mechanical? controlled machine. Have searched the net, but not much luck...
Top