• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. JimInOz

    Cat Link specs

    Hi All, I'm looking for the specs drawing on a 955K chain. Cat # 3P7154X Any help appreciated.
  2. JimInOz

    Deere 84 Loader

    I'm interested in getting in hearing from anyone who has owned an 80s/90s DEERE 84 Wheel Loader. Made by Furukawa, Japan. Specifically,I need a hydraulic pump AT108097. Maybe someone has a NOS pump somewhere. Thanks Jim
  3. JimInOz

    Torque Convertor Stator advice

    Hi Guys, I'm wondering which way this Reactor (Stator) fits in relation to the Turbine. I've attached a picture of each side of the stator ,plus the Turbine. I recieved this thing in pieces,so trying to reassemble in correct order. Thanks, Jim
  4. JimInOz

    Torque Convertor Stator advice

    Hi Guys, I'm wondering which way this Reactor (Stator) fits in relation to the Turbine. I've attached a picture of each side of the stator ,plus the Turbine. I got this thing in pieces,so trying to reassemble in correct order. Thanks, Jim
  5. JimInOz

    931 78U Pinion Removal

    Hi Guys, I'm dismantling an old 931 (78U) Loader. I wonder if anyone has a manual describing the removal of the (Bevel) pinion shaft.? I have all the other parts out,but can't quite figure out what to do with this pinion.. The early D3 is possibly the same set up. I'm impresssed by the quality...
  6. JimInOz

    JD 244 Loader questions..

    Hi All, I've never seen the JD 244 loaders....I don't think they came to Australia. I was wondering if the earlier 244s had a hydrostatic trans,& if so,what brand pumps & motors were used to propel the machine? I'm interested in the 80s/90s models, if they were made back that far. Thanks... Jim
  7. JimInOz

    Furukawa Crawler Manuals Wanted

    I collect any Manuals & Sales Brochures for Furukawa CT3/CD3/CT5/CD5 Crawlers. Also Iwafuji Crawlers. Please PM me.
  8. JimInOz

    955K Transmission selector issue

    Hi Guys, Working on restoring a 955K,which has sat idle for several years.Not a particularly well maintained machine. I got the engine running yesterday,but couldn't select any gears on the transmission. The selector gearstick & associated levers work OK, but the selector arm on top of the trans...
  9. JimInOz

    Furukawa FL60-1 Manuals Wanted

    Buying Parts & Repair manuals for Furukawa FL60-1 Loaders,made in the late 80s & 90s. PM me if you have hard copy or CD manuals.Thanks..
  10. JimInOz

    Case 455C Parts Book Scan Required..

    I'm looking for a scan of the brake area of a 455C . P.M me if you can help.. Any help is appreciated. Thanks, Jim
  11. JimInOz

    Mitsubishi BD2J Manuals

    I'm looking to buy OPERATOR & PARTS manuals for a BD2J. If anyone can copy them for me,I'm happy to pay.Will take CD or paper copies. I've had 3 quotes for one supplier this year,but they never quote postage costs,so I'm tired of them.... Thanks, Jim
  12. JimInOz

    Hitachi DX45 Parts Diagram Required.

    Hi , I'm wondering if anyone has a Parts book for a Hitachi DX45 dozer. I would appreciate a copy of the 3 speed transmission section. I have a friend with transmission issues & we need to identify part numbers on clutch packs,etc. A Furukawa FD45 might be the same . I'm happy to provide...
  13. JimInOz

    Mitsubishi BD2H & J Manuals required.

    Hi Guys, Looking to buy copies of the Mitsubishi BD2/BS3 H & J manuals.If anyone can do this,I can pay via Paypal.To be posted to Australia. Also looking to buy a Komatsu Gasket from the USA.Any help appreciated there too.I won't deal with the locals. Here's an action shot of my BS3F...
  14. JimInOz

    Bearing Selection

    Hi Guys, I posted a while ago,about a repair I need to do on a D31S Final Drive. It's the right side,& bull & pinion teeth were damaged. Finally got around to making a start,by pulling the Steer/Pinion Flange & it's bearing carrier.I removed the Final Housing & Bullgear a while ago. I note...
  15. JimInOz

    Grader Dismantlers

    Hi Guys, Just wondering if there are any specialist Grader Wreckers out there,that might be a good source for used parts. Every year I get a few calls for grader parts,but can never recommend a good supplier. It will be interesting to see what you guys know... Thanks, Jim
  16. JimInOz

    D31S Final Repairs.

    Hi All, It's about time I applied myself to fixing the bad R/H Final Drive on my Komatsu D31S-16. I have the parts & repair manuals,so I'm OK there. However,I'm interested in hearing any tips & hints that might make this repair a "did it right first time" repair.I had to import replacement...
  17. JimInOz

    Problems with a Neutral Safety Switch

    Anyone had a Neutral Safety Start Switch on a loader go bad? I was using my old FL90 loader last week ,& after trying to start her up after a short break....NOTHING! No click,no noise at all from the starter. Prior to this,the loader was starting easily,with no indication of failure. I'm...
  18. JimInOz

    Furukawa FL90 Manuals Required....

    I'm looking to buy Repair/Service,Parts & Operator manuals for an FL90 loader. If anyone can help,please PM me. Thanks, Jim
  19. JimInOz

    Furukawa FL90 Books required

    I'm looking to buy Repair/Service/Parts & Operator manuals for an FL90 loader. If anyone can help,please PM me. Thanks, Jim
  20. JimInOz

    WANTED: Komatsu D31S-16 Final Drive parts.

    Looking for good used pinion,bullgear & outer housing cover. PM me,with prices. Thanks,Jim.
Top