• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. M

    Komatsu alternator terminals

    So anyway thanks for all the helpful and supportive comments :-)
  2. M

    Komatsu alternator terminals

    Got it charging :-) ran a wire directly from the BAT terminal to the positive on the battery and just left the third wire where it was -ie it just goes into the harness and who know where it goes , but anyway obviously that part is fine and it was the main heavy BAT terminal wire that was...
  3. M

    Komatsu alternator terminals

    Thanks :-) so it wont feed in too many amps connected directly ? or to be safe should i run it through a small watt warning bulb ? :-)
  4. M

    Komatsu alternator terminals

    Good Day all :-) my old beat-up farm 200-6 excavator , the alternator hasnt been charging for 10 years :-) [just been taking the batteries home after each days run .] :-) Anyway finally trying to fix it so , obviously the BAT goes to the battery , the GRD goes to earth but , where...
  5. M

    pc200-6 wont rev out after half an hour

    it was a small white plastic sieve in a banjo bolt that holds on the inlet to the lift pump , totally blocked - surprising it ran at all ;-)
  6. M

    Grease instead of oil in final drive

    yes as it no longer has an oil cooler I only run it for 30 minutes at a time and it doesnt travel more than a hundred yards from the house/shed in 8 years and sometimes not run for months or even a year . Maybe Ill try the thickest oil I can find and see how long before it leaks out :)
  7. M

    Grease instead of oil in final drive

    Good day All :-) , I have an old beat up pc200-6 i use occasionally on my farm . One of the final drives is leaking - can i just pump in some grease instead of oil ? thanks ---Mat --- :-)
  8. M

    Advice on Common Problems Associated with Final Drives

    Good day , I have an old beat up pc200-6 i use occasionally on my farm . One of the final drives is leaking - can i just pump in some grease instead of oil ? thanks ---Mat --- :-)
  9. M

    Komatsu PC 210 LC-6 Problems with Power Loss

    Ok , Its a very old thread but I have the same problem .PC200-6 . mrjoe72 did you work out what was the cause ?
  10. M

    pc200-6 wont rev out after half an hour

    Good evening all , got an old pc200-6 farm excavator . after running fine for 20 minutes -1/2 an hour it gradually wont rev under load . After idling for a few seconds it will rev up but then the problem returns . After being turned off for a few houres its good agin for 20min/half hour then...
  11. M

    My D69U loses power after a half hour???

    G,day mate , did you find out the cause ? I have the same problem with an old farm PC200-6 Komatsu excavator after 20min-1/2 hour it wont rev under load . Thanks ---mat--- ;-)
  12. M

    Oil Cooler Repair

    "make one out of stainless". well making your own oil cooler out of stainless sounds interesting . how much do you recon it will cost in materials and how long do you think it will take ? I thought of making one myself [though just out of mild steel ] for my old farm pc200-6 as it has an...
  13. M

    Oil Cooler Repair

    I,ve got the same problem with my old beat up farm excavator except the cooler is aluminum . I was pulling it out to braze it and realized its aluminum . Anyone had any experience with the aluminum radiators? Fixable or any other ideas? Thanks -- mat --
  14. M

    run without hydraulic cooler ?

    G,day , i,v got a beat up old pc200-6 farm excavator . The hydraulic cooler was leaking pretty bad . I was pulling it out to braze it then realized it was aluminium .Wondering how long at a time i could run the machine for if I just bypass the oil cooler [which was pretty blocked up anyway]...
  15. M

    pc200-6 water seperator?

    G'day ,we have got an old pc 200-6 for occasional farm use and I cant find a fuel water separator anywhere.Where should it be ?Should have one according to the manual and everyone tells me any water in fuel will ruin injectors .Is it possible it didnt come with one , should i fit one or just...
  16. M

    water in drum of hydralic fluid

    Gday all , Ive got a half a 44galon drum of hydraulic fluid that got clean rain water in it through the lid . the water is mostly on the bottom . Can I still use it ,and what will happen if a few very small droplets of water do get in Most will stay on the bottom but a few tiny ones might get in...
  17. M

    hitachi zaxis electrical problem

    Just wondering if the issue was resolved .My old pc200-6 is doing similar things .Ignition wont turn off , wont start with key [have to use a screwdriver across the starter terminals] and wont charge the batteries .Its an old beat up farm machine and taking the batteries home when every time I...
  18. M

    How much leakage before you rebuild a hyd cylinder?

    I didnt know that.Does it mean that contaminants,dust ,grit etc get sucked back in the leaking seal under certain conditions?
  19. M

    transporting an Excavator

    Llooked pretty well done to me , probably pretty normal , if not 'best practice 'for the third world . Better get used to it ,first world is becoming third world pretty quick these days...
  20. M

    How to remove pin[axel]from idler wheel??

    Sorry fellers ,another dumb question from dumb-ass mathuranatha How do I remove the pin[axel] that goes through the center of the track idler wheel??[Pc 200-6] The axel support things that are on each end of the pin [that bolt on to the spring ,adjuster assembly] seem to be pressed...
Top