• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Doug802

    Truck pto driven side manure spreader

  2. Doug802

    Truck pto driven side manure spreader

    Maybe 50hp but we use 100hp tractor for the weight when loaded
  3. Doug802

    Truck pto driven side manure spreader

    Thinking about mounting our martin side slinger manure spreader on a truck for some hayfields too far for a tractor. Was wondering the best/easiest way to go about powering the pto shaft on the spreader. Also need to have hydraulics to open the door to let the manure out to spread. Saw a pto...
  4. Doug802

    2005 John Deere 120c slow final drive and dipper

    UPDATE. Handed the machine off to a mechanic and he pulled the hydraulic filters and found metal in them which means the main pump is bad. Bought a reman for it and hope we aren’t fighting with metal sticking in valves and such for a while
  5. Doug802

    2005 John Deere 120c slow final drive and dipper

    Can you see it from that picture?
  6. Doug802

    2005 John Deere 120c slow final drive and dipper

    I found it in the manual but can’t tell from the picture where item 59 is on the machine.
  7. Doug802

    2005 John Deere 120c slow final drive and dipper

    How do I check the 5 spool isolation check valve? I bought the operation and test manual. #2 stays at 0.6 when curl bucket in and holding. 35.1 when I hold boom back all the way
  8. Doug802

    2005 John Deere 120c slow final drive and dipper

    Replaced pump 2 pressure sensor. #3 reads 0 when engine off, key on. 1.1 at idle. 34.6 when revved up stalling arm. Dipper and track still slow
  9. Doug802

    2005 John Deere 120c slow final drive and dipper

    Key is on. Gonna order that part
  10. Doug802

    2005 John Deere 120c slow final drive and dipper

    When I swapped the wires #3 shows 0.0
  11. Doug802

    2005 John Deere 120c slow final drive and dipper

    #2 is .6 at idle. 0 with key off #3 is 23.3 at idle 23.3 with key off
  12. Doug802

    2005 John Deere 120c slow final drive and dipper

    That is monitor #3. Idling it’s 23.6 using no functions and full throttle using functions and stalling it out it stays 23.6 doesn’t move a digit
  13. Doug802

    2005 John Deere 120c slow final drive and dipper

    Yes, full throttle it stays the same
  14. Doug802

    2005 John Deere 120c slow final drive and dipper

    23.6 idling and while stalling arm
  15. Doug802

    2005 John Deere 120c slow final drive and dipper

    So is my next step testing the pressure at the pump?
  16. Doug802

    2005 John Deere 120c slow final drive and dipper

    If I hold bucket curl in I get 4.3
  17. Doug802

    2005 John Deere 120c slow final drive and dipper

    Just to be 100% sure, by stalling the bucket you mean curl it in all the way and hold it there? Doing just that doesn’t make the pressure go up, it stays at .6 on bucket curl but when moving the stick it will go up in the 20s
  18. Doug802

    2005 John Deere 120c slow final drive and dipper

    For a very short period, a few seconds the curl operates like it should and it tracks fast on both side then it stops and the right track is super slow again and the bucket curl is as well. Can’t get (2) to get up to 30 like it should be
  19. Doug802

    2005 John Deere 120c slow final drive and dipper

    4.3 when using boom and stick to drag bucket on the ground towards me and while curling in bucket
  20. Doug802

    2005 John Deere 120c slow final drive and dipper

    Stalling the bucket didn’t raise the pressure on the screen
Top