• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. R

    Case 450c hesitates shifting when warm?

    Are you referring to the sealing rings on the pto shaft? I had to replace them on my 850c, there's 3 of them and I made and installed a sleeve to go in the housing. Should be a tube cover on the back with two lines going into the top of it. The pto shaft and sealing rings are in there.
  2. R

    Case 850c torque converter leak

    Hard to take a decent pic. There’s a rectangle cover on the top left of the torque converter housing. Looks like I sprung a leak there. Is that just an inspection cover or is it sealed and pressurized?
  3. R

    Case 850c oil control rings

    Does any one know the part number for the 3 oil control rings behind the rear cover? Machine acts funny after driving for awhile and its symptoms match up with other posts on here where these 3 rings are mentioned. Figured I’d order em before tearing it apart. Is there just one set of them? Any...
  4. R

    Case 850c

    Thanks, that was just what I was looking for.
  5. R

    Case 850c

    Pretty sure I’m picking up a 850c. Plan to do a full service when I get it home. Does anyone make a filter kit that has them all in one kit? Or have part numbers? Recommend fluids? I have a lot of final charge coolant for our semi’s. Any reason to not use it for coolant?
  6. R

    Right side takes off on its own

    Everything from the control arm to the pump lever is good. I was adjusting the neutral on the left side when I noticed the right side. Not sure since it hasn’t been drove much lately if a valve inside could just be sticky
  7. R

    Right side takes off on its own

    Case 90xt. I don't know if I just need to drive it a bit but the right side after sitting still for a few seconds will take off going forward on its on. Not all the time just occasionally. Not a creep but pretty quickly. Toggling the stick backwards will usually clear it up but sometimes it'll...
  8. R

    Case 90xt creep

    Case 90xt creeps on the left side. I unhooked the linkage and it spring returns to center but still creeps. I found something about a centering valve but no mention of where it is or how to adjust it. Any tips?
  9. R

    Case 90xt rattle

    Looked it over today. Besides the fluid being milky and needing changed in the chain cases the chains and sprockets both looked good. Wheel bearings had no noticeable movement in them. It appears the right side drive motor has been replaced at some time but not the left. Left side has some creep...
  10. R

    Case 90xt rattle

    It’s a new to me machine. I’ll check the chains and bearings on my next day off. Thanks
  11. R

    Case 90xt rattle

    I have a Case 90xt that has a rattling noise coming from the left side. You can only hear it from inside the cab. And only at slower speeds. Goes away when you speed up. Drive motor or chains? Also it likes to creep when in neutral. Can I just adjust the linkages?
Top