• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. F

    Cat D6N fault codes. Please help!

    Wow, thank you so much for the information. I picked up the machine at auction so i am unsure as to the engine. I was able to wait a few minutes and restart the machine and go to work as normal. I will look into all the information you provided. Again, thank you so much for the advice!
  2. F

    Cat D6N fault codes. Please help!

    I have a cat d6n dozer sn: Djy00987 with the following codes: Active 036 0526.05 Inactive 030 0248.02 030 E0179.1 114 2233.04 036 0266.02 036 2417.05 036 0100.03 036 E0232.1 036 E0172.1 036 E0361.3 036 E0361.2 036 E0361.1 Can anyone let me know what these codes are or where i can find the...
  3. F

    Splitting Cat D6N track

    i need to remove the master pin and remove the track on my CAT D6N sn:djy00987. Pivot shaft was quite neglected by the previous owner…. All the pins appear the same around the track when i am looking for the master pin. Can anyone explain how this track is best removed? This machine is new to...
  4. F

    938M coolant overheating

    I have a 2015 938M J3R00536. Coolant temperature starts at over 100 degrees and climbs steadily after starting until the buzzer and alarm sounds when it reaches 250 degrees or so. Full of coolant. Radiator has been cleaned. Would anyone know the location of the temperature sensor itself...
  5. F

    259D Speed Sensor issues

    Thank you for the information. My 289d is probably wired the same under the cab so i will check that out next. I’m glad i didn’t just buy a new sensor.
  6. F

    259D Speed Sensor issues

    Finally found time to work on this. I swapped the sensors and the problem stayed on the right. Right drive motor sensor still showing 16,700 rpm. So the issue must be with the wiring from the ecm? Does anyone know if the wiring passes near the right joystick in the cab as after I replaced...
  7. F

    259D Speed Sensor issues

    Thank you! I cleaned the machine up today and the wires look stretched from all the mud that was packed in there. Im guessing it is a short. Will check back in once i get in there. Thanks again for the assistance
  8. F

    259D Speed Sensor issues

    Are the sensors located on the drive motor itself? Where exactly would their location be? Thanks so much
  9. F

    259D Speed Sensor issues

    I have a 2014 289D sn TAW00986. 1100 hrs Just recently replaced the right joystick position sensor. I am getting active codes 2688-8 and 2687-8. Both reference the right hand drive motor speed sensors 2 and 1. Service screen shows right Drive motor stuck around 16000 rpm. Noticed...
  10. F

    Cat 289D 2475-3 Right Joystick Error

    Taw00986. I Appreciate the response. I have actually narrowed it down to the joystick module by simply plugging the left joystick in to the right side harness since they are the same part number. That allows the right stick functions to work utilizing the left joystick. Wiring is good going...
  11. F

    Cat 289D 2475-3 Right Joystick Error

    I am having the exact same issue. Did you ever find a solution?
  12. F

    Deere 160d lc black smoke

    Here is some pics of the engine and turbo. No noticeable oil in the turbo on the turbine side. Anything else I could check?
  13. F

    Deere 160d lc black smoke

    Serial number- FF160DX050279 i can get a picture of the engine in the morning thanks again for the help!!
  14. F

    Deere 160d lc black smoke

    Is there any other items that would be close to that. Is it possible i do not have an egr valve? Its a 2008.
  15. F

    Deere 160d lc black smoke

    What kind or how bug of a pressure gauge should i use to check the boost pressure at that port?
  16. F

    Deere 160d lc black smoke

    It starts good. Black smoke was really bad when I first got it. Changed everything oils and filter wise and it improved a little but is still quite noticeable when you move a control lever. Could i see anything from just pulling an injector out you think? It still runs great when there is no...
  17. F

    Deere 160d lc black smoke

    Yes, i was getting two codes here. I will post the picture of them. At first they would come on and I would drain the water separator and then they would go away for some time. But eventually, no material how much I drained it, took it apart and cleaned the sensor, it would just come back...
  18. F

    Deere 160d lc black smoke

    Not alot of oil really. How do I check the boost pressure? Forgive me if I don’t even know what that is? Still learning as i go
  19. F

    Deere 160d lc black smoke

    Thank you very much for the information. I will be replacing the sensor wiring along with the entire fuel water separator next and see what happens.
  20. F

    Deere 160d lc black smoke

    No not recently.
Top