• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. S

    TEREX HR32 7.5 TON DIGGER (2003)

    might be something to check but maybe there is a parasitic drain on the batteries as the op said it starts and works well after first startup
  2. S

    Help with komatsu wa500-3lk

    Hey guys I am looking up some info on a komatsu wheel loader, since I am familiar with cat and sis /et does komatsu have something similar ? Will make Lot more sense than having to buy the individual service manual for each machine. I know some has been helping my brother with info . I would...
  3. S

    Help diagnosing a cat320d starting issue

    Hey guys update time , we got to the machine and the mechanic decided to do some more in depth checks before diving into the injectors , we checked rail pressure and was only getting up to 1700 psi with spikes of 2400psi, disconnected the rail and connected the Guage to the high pressure pump...
  4. S

    Help diagnosing a cat320d starting issue

    thanks for the responses guys , i gathered that much about the trim files ,just i am a bit more prepared when its being changed. today im collecting the parts and going down to the machine ,will update as it goes by.
  5. S

    Help diagnosing a cat320d starting issue

    So when I do download the product status .. do I just compare and change what is on there or just re-upload the old one?
  6. S

    Help diagnosing a cat320d starting issue

    I already ordered it , u don't want to see the bill. Tomorrow I'll be picking up the parts
  7. S

    Help diagnosing a cat320d starting issue

    Forgive my noobiness since this is my first injector change with this excavator , previous ones were 3176 but the product status is found under configuration in ET?
  8. S

    Help diagnosing a cat320d starting issue

    When changing injectors do I need to input the trim files found stamped on the injector?mechanic kno2s what he is doing but I'm asking for my own information
  9. S

    Help diagnosing a cat320d starting issue

    So all tests points to injectors so I'm in the process of ordering in a set of injectors and lines, is there a washer like the 3126 as I'm only seeing a o ring seal part number 294 1803 and a gasket 1r 6573? Also is the 326 4756 injector been replaced with any newer numbers ? Thanks for the info...
  10. S

    Help diagnosing a cat320d starting issue

    Ok machine is doing 12800hrs all filters were changed about 3 weeks ago by me and tank is drained once or twice a week ,the sediment filer is clean , haven't tried pressuring the tank yet .tomorrow I'll walk with my laptop and get the readings both when it's hot and cold
  11. S

    Help diagnosing a cat320d starting issue

    Thanks ,will do that tomorrow , when you say dumping ,is it bypassing via the seals ?
  12. S

    Help diagnosing a cat320d starting issue

    Hey everyone, I have a cat 320d serial kgf 00768 that recently started giving some problems , operator shut off for lunch one day and it refused to start . Tumbled for about 30 sec before it started .Since then on on morning where it used to start in half tumble its takes about 10 sec before it...
  13. S

    CAT 320d hydraulic joystick rebuild kit

    hey guys i have a cat 3200d excavator serial num kgf00768 that the joystick are leaking , question is can i get a rebuild kit for it or do i have to replace the entire valve , im seeing on sis its 2970529 but not seeing any rebuild kits thanks for the help
  14. S

    Which excavators have the smoothest/most responsive controls?

    havent seen anyone mention volvo ,is it that they are more expensive ?
  15. S

    Cat 320d Swing Motor

    hey guys i have a cat 320dl serial number kgf00768 has a leak from the top plate where there is 4 16mm allan head bolts . I am wondering if there is a rebuild kit that cat supplies or do i need to purchase it separate? I looked up a couple schematics and didnt see any upper seals so i am...
  16. S

    CAT 950G No output from ECM to starter relay

    Hey op any update ? Was the ecm sent back to Mia?
  17. S

    Help with roller cb214d

    Thanks so very much both of you , will be at the machine later today and update as I go along .
  18. S

    Help with roller cb214d

    Also if I read that right it's tighten to the screws to compress the spring for it to freewheel and the opposite for it to lock up ?
  19. S

    Help with roller cb214d

    Heymcall as I said we bought the roller from someone so I don't know what was done or not done. Thanks very much for your help as this is the type of info I can use to check . As it is now I have gotten the roller to work better than before by overhauling the main pump and changing the buffer...
  20. S

    Help with roller cb214d

    Electrical system is ok , no problem. As for anything else I am just assuming the worst and not taking anything for granted . Thing is when the roller cuts off it still rolls, I know the sakai has a mechanical screw to get it to release the brakes ,I honestly don't know how the cat is supposed...
Top