• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. ghitch75

    79 580c hydro tank

    when every i add hydro fluid to the tak and i remove the filler plug there is pressure on the tank.....is there a one way check some where that relieves the pressure?....where would it be if there is one?
  2. ghitch75

    580c loader bucket

    will a 580SL loader bucket fit on a 580C?
  3. ghitch75

    580C boom bucket quick connect???

    i have seen them for other models but not for a C......anyone knows if they make one for a C???
  4. ghitch75

    bucket teeth?

    i need new teeth for my 580C buckets........will 230SP teeth work or do i need 230's? thanks
  5. ghitch75

    springs running out of a bank?

    i have a bank that had to be cut when i built my house.......there is 2 springs that have started running out about 2/3 the way up the bank.........what would be the best way to get the springs to dry up or divert them?
  6. ghitch75

    1966 IH 500 with 10 bullgrader

    it was going to be scraped and needed a lot of work......i rebuilt the engine....the radiator was for a hot rod.....missing the front side panels....the undercarriage was broke loose from the frame.....blade arm was cracked in about 20 places.....was in pretty rough shape......now it pushes...
  7. ghitch75

    Ih 500

    picked this up for a trade of a S&W model 10 38 and $500.00 for it.....PO said it just needed timed.......as he had the IP rebuilt for what he said was a miss..... ..made sure all the timing marks where right and still wouldn't start just blew raw smokey fuel......pulled glow plugs and checked...
  8. ghitch75

    tail gate release?

    i have a 5 yard bed with a manual tail gate release and i would like to put a air release on it........would someone post some pic's of there air release so i can see how to rig mine.....thanks...
  9. ghitch75

    580c steering trouble?

    i have a 79 C and i have been roadin' it about 5 miles one way to do some work.....after about 4 miles the steering gets real jerky and stiff when i let off on the throttle to slow down.......the steering valve leaks a little fluid when cold the stop when warm....any ideas?
  10. ghitch75

    case 850D engine pull?

    helpin' a buddy pull his engine.....does the shuttle and engine all come out at once?....then do you have to strip the shuttle to get it off the block? thanks:usa
  11. ghitch75

    580c steering?

    need to here from the 580c gang.......does your steering get stiff with a load in the loader?.....my old pump gave up and i got a new 1 and it went for 2 months then started leakin' and was sent a new 1 and the new 1 steers hard when loaded......when it's cold it's better than when warmed up...
  12. ghitch75

    4 in 1 loader bucket?

    would a 4 in 1 off a SK fit on my C?.....here it is....a little passed half way down on the page.... http://bobhinesequipment.com/equip3.htm
  13. ghitch75

    hydro taps?

    there are 2 taps for test gauges on the loader spool.....could i use those for a hook up for a grapple on my 580c? thanks :usa
  14. ghitch75

    snap ring pliers?

    i have broke and returned 3 sets of snap ring pliers that was suppose to be HD sets.....these have been plier and screw type!!!.....who has the best to do from 1" to 3" external rings....could you post what brand and where you got them....thanks:usa
  15. ghitch75

    case vs tree!!!

    the tree won:Banghead....i found these on the net.....might have been posted before.... :usa
  16. ghitch75

    turbo on a 580c?

    1. i would think it would clean the exhaust when pullin' hill with a load on and a little more power.... 2. would the oil pressure sensor hole push enough oil for the bearings? 3. or would it just blow the head gasket.. 4. i don't think pipin' it would be to tough.....lots of room under...
  17. ghitch75

    580C dash

    i built me a new dash for my 580C....my tach was bad and case wanted 250 buc's for it and the only other gauge that worked was the engine temp.....so for around a 140 buc's i got a tach/hour,engine temp.,engine oil pressure,amps and shuttle temp.....the black ringed 1 on the top right is the...
  18. ghitch75

    580C shuttle?

    in forward it doesn't make any noise in reverse it makes a sceamin' noise is it normal?.....i have change the fluid and clean the screen......but i didn't put Case BRAND TCH in it but it was a equivalent Marathon brand..... thanks:usa
  19. ghitch75

    boom pins?

    the 2 boom pins on my 580c won't take grease....i pulled the zirts and there not clogged....if i heat them with a torch to loosin' them up will i damage them? would like to here any tipps or tricks to get them to take grease... thanks:usa
  20. ghitch75

    help with laser?

    i don't know a thing about laser levels....it's going to be used for building my house and pole barn.....would this 1 be good enough? http://cgi.ebay.com/NEW-CST-Berger-57-LM30PKG-LaserMark-Laser-Level-System_W0QQitemZ290312473580QQihZ019QQcategoryZ42298QQssPageNameZWDVWQQrdZ1QQcmdZViewItem...
Top