-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
bd2g
-
B
Mitsubishi BD2G clutch
Not that I have a problem at this time. Does anybody have an idea of where I could locate main clutch components? -
E
Mitsubishi BD2G Parts
Hi I am looking for some parts for my Mitsubishi BD2G Dozer I need the main drive sprocket for the tracks. Mitsubishi BD2F / 12" wide / 38 links / 135mm pitch / 27 tooth ,one pcs. drive sprockets I was wondering of anyone knows where I can find these? Thanks... -
D
Mitsubishi BD2H dozer runs rough and burns oil after tipped
Hello, I am new to the forum. My Mitsubishi BD2H dozer was recently tipped over on its left side in an accident downhill, it ran for around 10 seconds at high throttle and I quickly choked the air intake after the fuel shutoff would not kill it, as it was likely running on oil. After righting... -
B
Help with a Mitsubishi BD2G Hyd. Pump
I have been looking for the drive shaft/sprocket (part #55321-00400) for the clutch lube pump and not having any luck. If anyone has any ideas I would sure like to hear them. If I remember correctly this pump is the supply for the controls as well. Thanks. -
P
main pin on U-frame BD2G
HI their, I have a BD2G that I just rebuilt one of the hydraulic lifting cylinders on , afterwards I noticed that the blade would shift from one side to the other while lifting or pushing down with the blade,, after a lot of looking I found out that the main pin and keeper were missing from the...- penetrater
- Thread
- bd2g
- Replies: 14
- Forum: Dozers