• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

cat dozer

  1. J

    Caterpillar D6t blade creep

    Hi all I’m having problems with my D6t blade slowly creeping down when the joystick is in the neutral position blade drops from fully raised to ground in around 2 minutes also the rippers slowly drop down probably 2 inches and hour. The machine is a pilot control valve setup s/n WFH00351. Any...
  2. C

    Cat D5C Bogging down and loosing power

    OK so here's the back story. We just bought this 1998 D5C hydro dozer. Had been using it intermittently but not for very long until we noticed It has been starting to overheat. Found the oil cooler plugging due to an oil leak. Now that we were able to use it longer we are noticing a couple...
  3. D

    Looking at purchasing a 1963 D7E with Trans problem's

    I recently looked at purchasing a D7e dozer. The guy that owns it has had it for 10 12 years. 2 years ago he parked it in the winter, came back in the spring and started using it after one long push it wouldn't back up. He cleaned all the filters, and found crap on the bottom screen. He also...
  4. J

    Cat D5N Dozer tracking slow.

    Unloaded my dozer and lights started flashing and buzzer going off. When placed in gear it will track but only very slow. Any ideas?
  5. Seans problems

    D5C lpg dozer wont move again

    Serial: 6CS1142 Hi every one, A while back with the help of the community I found that the valve for the parking brake on the machine locked up the tracks. After swapping that solenoid and valve it ran great until today. Operator stated that he was pushing a pile slightly uphill and the tracks...
Top