• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

chipper

  1. A

    John Deere 4045

    I have a customer with a woodsman 12x and it has a 4045 series 2 (stanadine ) fuel system in it. it has been butchered and I have been asked to look at it. no start turns over good cca, new battery. Sus on ecu as it has been butcherd as well and lid siliconed back on however is putting out 8-9v...
    • Aust 1
    • Thread
    • chipper john deere stanadine stanadyne woods woodsman\
    • Replies: 4
    • Forum: Forestry Equipment
  2. J

    Vermeer BC625 Engine Swap

    I have a BC625 limb chipper with a Kohler 25hp motor. Looking to swap the motor and was looking to see if anyone has any experience with this, and can give any tips/tricks. I've found replacement motors, but the one that is on it has a horizontal shaft for the flywheel, and another shaft on...
  3. F

    Pto wood chipper on a case 580c

    Hey folks, I have a Case 580C with the 3 point and hydraulic pto, I need to know if hooking up a 3 pt wood chipper directly is ok or will it break a shear pin or pto with the hydraulic pto?? I don't have much space to put a slipper clutch in if needed, I'm checking if anyone runs a chipper...
  4. A

    Mower king attachment

    Does anyone know where you can find specs for Mower King attachments? I cannot find anything for this model chipper S8BX42
  5. B

    Vermeer BC1800XL John Deere infeed

    I have a new to me Vermeer chipper with the John Deere diesel. The engine warning light from the ECU is lit, although all is good, and with this on,Vermeer the infeed roller system will not function. Is there any way to clear any codes in the ECU without having to take to dealer or owning the...
Top