• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

compactor

  1. A

    Ingersoll Rand sd45d wont go forward or reverse after 40 min of use

    Got an Ingersoll Rand sd45D, after about 45 min of use after it gets up in temp it wont go forward or reverse. Happens only if I apply the park brake. If I dont apply the park brake it will run the whole time, if I have to get out of the machine and apply park brake I cant get it to roll again...
    • A2Aexc
    • Thread
    • compactor ignersoll rand overheating roller
    • Replies: 2
    • Forum: Rollers
  2. C

    Xcmg xs120 roller

    Can anyone give me the part numbers for centre pivot pin and bushings for the pivot joint at the centre of this machine? Serial # 20060054
    • Cat.man
    • Thread
    • bushing bushing replacement compactor pin pin and bushing turning roller xcmg
    • Replies: 0
    • Forum: Rollers
  3. C

    Case sv216 roller no start issue

    Got a case sv216 roller with common rail cummins engines, crank no start issue, what should I check for?
  4. RenoHuskerDu

    Wacker Neuson parts source?

    I bought a Wacker RTSC2 compactor and need a part or two. First I need a new battery for the controller. That battery must be made of gold cause it's $190 even on fleabay...
  5. A

    BOMAG BC 571 RB Sanitary Landfill Compactor

    Good Night, I have a question about the BOMAG sanitary Landfill Compactor, model BC 571 RB. For some reason the steering lever of the compactor is only turning left completely, but is not turning in the other direction. What are the possible causes for this issue? Any help appreciated.
  6. J

    COMMERCIAL COMPACTOR REPAIRS

    Hey Blue Collars! I am curious to know if any of you have a hard time finding pages that talk about repairs/installations for compactors/balers? (e.g. marathon RJ250, vertical balers, etc.) Is this a common field/marketplace? Or does it even exist? I'm intrigued by these fascinating machines...
Top