• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

injection

  1. J

    IT18B FUEL ISSUE!

    I have a customers IT18B, serial prefix “1DF” with a 3204DI. it dropped a valve, put a new reman head on it, and new piston/rings. Can not get it to fire witho it ether or pumping the primer while cranking. Fuel system was a bit sad so decided to overhaul it. Had the injection pump rebuilt, and...
  2. Keenan

    Case 450B THROTTLE SHAFT LEAK quick fix??

    The fuel injection pump would leak mild to moderate for a while at the throttle assembly area for a while but recently starting leaking very bad to the point where I need to do some kind of quick fix because I don't want to pull the pump and replace it something just enough to slow it down. As...
    • Keenan
    • Thread
    • fix injection leak master pump roosa
    • Replies: 4
    • Forum: Dozers
  3. H

    Perkins Diesel Engine injector O-Rings gone hard within 2 days!!

    Guys, Could anyone help me with injector O-rings from perkins engine that after replacement have gone hard and broken within few days. They were fine for years and then were worn out had to replace them with new one and again gone hard and broken again. Perkins Generators HEUI 459-8473...
  4. CJAMS

    CASE 580C Injection Pump Issue

    Hi all, 1st time post here on the HE forums. I have a 1978 CASE 580C for about 13 years with no issues and now it has begun running rough at idle but seems OK above idle and higher. The problem came on slowly over the winter, I first noticed it by having to pull throttle lever a bit to idle and...
Top