• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

wheel loader transmission

  1. DipStick69

    621F Transmission swap.

    I've never done a transmission swap on a case loader before but I have everything loose, and the tranny is ready to be pulled will it be easier to take the cab off and pull it out through the top or lift the tractor and pull it out the bottom?
    • DipStick69
    • Thread
    • case 621f transmission swap wheel loader newbie wheel loader transmission
    • Replies: 0
    • Forum: Wheel Loaders
  2. Bright koomson

    962G transmission modulator valve heating

    Have changed the ECM many times but still can't move but makes an attempt to. But when connected to a 12V battery it moves
  3. M

    Flow rate of a torque converter?

    Would anybody know what the GPM rating is of a Torque converter in an Allis-Chalmers 645 wheel loader? I'm in the process of changing the engine because the old one spun some of the crankshaft main bearings. I haven't found an identical engine (that still runs) so I'm looking at the possibility...
    • Manny machineguy
    • Thread
    • allis-chalmers engine torque converter torque cooler wheel loader wheel loader transmission
    • Replies: 1
    • Forum: Wheel Loaders
  4. D

    Allis Chalmers 545B transmission

    I just replaced my TT 2221-1 Allison transmission in my wheel loader and cannot seem to get the charge pump to pick up the fluid. I put in 15/40 to start and have tried 3 (used) pumps that I have. I have put a hand crank pump to the draw tube to check if there were any leaks in the tube. I was...
    • Douglas 545B
    • Thread
    • allis chalmers transmission issues wheel loader transmission
    • Replies: 0
    • Forum: Wheel Loaders
  5. 9

    Cat 988F Transmission/Torque Converter Issues

    Gday all. New day, more transmission problems. Cat 988F seems to be now slipping in all gears. Thought it might have been torque converter problems as I had been digging dirt and towards the end of the day seemed to be lacking pushing power in order to fill the bucket. No wheel slip when...
    • 988Driver
    • Thread
    • 988f caterpillar transmission wheel loader wheel loader transmission
    • Replies: 3
    • Forum: Wheel Loaders
  6. Seans problems

    1973 CAT 930A wont budge

    This thing was parked about a year ago from what I hear and they dispatch it the other day. The operator goes to start it and nothing happens, Okay. Jump the batteries after I checked them and this thing turns right over and starts. I put the jump box back and operator says he shut it off by...
  7. B

    1980 TROJAN 1900 speed in 2nd gear

    Hello, I have a 1980 Trojan 1900 model wheel loader, in first gear (2 gears) it is strong and can make wheels spin if the bucket is against a rock load, but in 2nd gear, with nothing in the bucket, just going uphill a little it slows down to walking pace. I'm not sure but I think i have seen on...
Top