• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

wont move

  1. T

    Case 850 D TCV Advice needed

    Good morning all, We recently purchased (And Received) a Case 850 D from an auction it starts and (Moved) just fine off of the trailer and around our lot. We were told the brakes needed service and that fluids and filters should be changed. A few days later we went to move it into our shop for...
  2. Z

    Jcb 1400B backhoe

    My late grandfather left me his JCB 1400B backhoe in 2019. Runs great! But, out of no where it will not go forward or reverse. I don't have a manual, only parts list. Checked the small spring behind the clutch pedal and it's brand new (grandpa wrote in parts book he recently replaced it about...
  3. D

    JD 450H safety sensor problems

    I'm having some issues with my JD450H dozer. It got where it wouldn't turn over. Turning the ignition did nothing. I suspected the safety sensors under the drive handle. Had a guy check and he said the neutral switch was faulty, so he jumpered and bypassed it. Dozer cranked up perfectly...
  4. S

    kubota svl75-2 hydraulic pump pickup

    Had an issue with one of our svl's. It wouldn't move 2' without it shutting down. Upon some intense inspection we found the hydraulic tube on the bottom of the high flow bump was cracked around the flange. It isn't the best of design. It's some pretty thin wall tubing that has three tack welds...
  5. H

    Bobcat 331 won't boom up or down

    Gentlemen good evening! Long time lurker needs some help. My issue; I just picked up a Bobcat 331, s/n 234314211, with just shy of 1900 hours on it. I've had an intermittent issue where the boom cylinder refuses to move. Today it was very stubborn, and after a few starts and some...
Top