• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

2013 Genie GTH 1056

W

Whtskookin

New Member
Joined
Mar 5, 2024
Messages
2
Location
Texas
I have a 2013 gth1056 that is not getting power to the ignition. I have tested and searched until I’m pissed! If I send power to the ignition switch with my power probe it fires and runs but only the boom will operate. The sway won’t engage, the forks won’t tilt, and it won’t move. I thought I had it chased down to the fuse panel since power was going out some places but not others. That was an expensive wrong diagnosis. Any other suggestions?
 
Z

Zewnten

Senior Member
Joined
Apr 2, 2018
Messages
568
Location
Earth
Other than jabbing your power probe into places what other troubleshooting have you done? What is known good?
 
You must log in or register to reply here.
Top