tylerdix09
Member
My 690elc will start fine and operate fine in the morning. It will get a little hot in the afternoons but if I turn it off and try to start it again it won't start just turns over. I have fuel at the injectors.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
690elc no start after running
- Thread starter tylerdix09
- Start date
Diesel Dave
Senior Member
Sounds like the internals of the injection pump is sticking when hot not allowing proper fuel delivery.
@thepumpguysc may be able to help out with your Stanadyne DB4 injection pump.
@thepumpguysc may be able to help out with your Stanadyne DB4 injection pump.
thepumpguysc
Senior Member
- Joined
- Mar 18, 2010
- Messages
- 7,547
- Location
- Sunny South Carolina
- Occupation
- Master Inj.Pump rebuilder
If it’s a DB4 Stanadyne pump, the voltage is stamped into the top cover..
Thanks Dave
Thanks Dave
tylerdix09
Member
Is there a way to clean it out. Or does it need replacing
Probably rebuilding and TPG can do that for you. I've heard he will rebuild fuel pumps for a nice backrub.......if you're into that sort of thing. Most opt to give him a bad check.
