I bought a 2017 S650 with 400hrs on it. Put 100 hours on it and lost all the hydraulic oil into the chain case. After some reading and being unable to see which side was leaking I replaced left and right carrier seals (2 seals each side instead of one). It sucked and I was all ready to hang the motors but I cannot seem to get them back on the carrier. The end of the two speed motor sits on the outer frame and the angle is enough that I cannot fully seat the spline. After 2 hours of adjusting. I still cannot get it on. What am I doing wrong.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!