Hunter013
Well-Known Member
Caterpillar 725 s/n: B1L00199
Just did bearings and seals on the driver side front final drive. Decided to do brake pads and rotor also. Put everything back together and I’m curious if there is a procedure or measurement for how far the pins (that hold the pads in place) should be from the rotor. I’ll attach a breakdown for clarification on the parts.
Just did bearings and seals on the driver side front final drive. Decided to do brake pads and rotor also. Put everything back together and I’m curious if there is a procedure or measurement for how far the pins (that hold the pads in place) should be from the rotor. I’ll attach a breakdown for clarification on the parts.