Colney
New Member
Anyone ever had an issue getting the left drive speed sensor on a 2018 CAT 259D off? I have tried everything. I have the bolt off but can not get the sensor to come out.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Colney
New Member
I am reaching behind. I can turn it a 1/8 of a turn left or right. Makes no sense why it isn’t coming out. I’ve put Chanel locks/vise grips wiggle back and forth and still won’t come.
Just have to pull on it harder. If it's turning it will come. If I'm remembering correctly the oring is a quarter inch or so down the shaft of the sensor not right on the top. It allows a bit of rust to form for you to drag the oring over
Colney
New Member
Do you think it would be fine to heat it up?