Copenhagen
Well-Known Member
Our Kobelco was running horribly the other day. It would run up to its high rpm for about 10 minutes then it would stumble and sputter for a few seconds then it would run back up again.
I thought I had a bad fuel filter so I replaced it. When I pulled the old one off, it looked like a piece of latex was lining the inside of the filter and not letting the engine get any fuel.
After the new filter was on, it did the same thing. It looks like someone dropped a latex glove in there and it is coming out in pieces about the size of a quarter.
Now the machine will run fine for 15 minutes then take a dump on itself and I have to get out and clean all of the pieces out of the filter.
Is there a liner in the tank that is coming apart? I would really like to think that it wasnt vandalism or sabotage!
:beatsme :beatsme :beatsme
I thought I had a bad fuel filter so I replaced it. When I pulled the old one off, it looked like a piece of latex was lining the inside of the filter and not letting the engine get any fuel.
After the new filter was on, it did the same thing. It looks like someone dropped a latex glove in there and it is coming out in pieces about the size of a quarter.
Now the machine will run fine for 15 minutes then take a dump on itself and I have to get out and clean all of the pieces out of the filter.
Is there a liner in the tank that is coming apart? I would really like to think that it wasnt vandalism or sabotage!
:beatsme :beatsme :beatsme